Airtac ACED Double-acting Compact Cylinder ACED32X80SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X80SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X80SB
The ACED32X80SB is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format: a 32 mm bore with an 80 mm stroke, a 12 mm rod exiting BOTH covers, and a male rod thread (B code) on each end. Because both strokes work on the rod-side area, output is identical in each direction - 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa - with a fixed TPU bumper at each end and a speed range of 30-500 mm/s.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarded cells. The through-rod resists rotation and side load and gives a symmetric mount, and the back-end rod can carry a sensor flag. This -S model carries the magnet, so CMSE / DMSE reed or solid-state switches mount directly in the body slots. As a rule of thumb, plan on about 207 N of usable work at 0.5 MPa, which lifts roughly 17 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED32X80SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X80SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X80SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X80SB Is Used
Symmetric fixture clamping
The male-threaded through-rod lets a clamp arm bolt to either end of this 32 mm bore unit, delivering 345.6 N per side at 0.5 MPa on a CNC jig - identical force whether the arm pushes or pulls.
Reciprocating slide drive
With equal thrust both ways (483.8 N at 0.7 MPa) and a rod that resists rotation, the ACED32X80SB drives a small pick-and-place slide back and forth at 30-500 mm/s without a guide torque problem.
Position-flagged gate on a packaging line
The fitted -S magnet plus CMSE / DMSE switches give end-of-stroke confirmation for a reject gate or divertor, while the short ISO 21287 body fits the narrow guard envelope of the conveyor frame.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X80SB the Right Cylinder?
At 345.6 N per side at 0.5 MPa, the 32 mm bore suits clamping and transfer tasks in the 200-350 N class; step down to the 25 mm bore (206.2 N) for lighter tooling or up to the 40 mm bore (571.8 N) when the load grows. The 80 mm stroke sits well inside the 200 mm maximum standard stroke for this bore, so it ships as a catalogue item. Note that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must be held. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and the fitted magnet accepts CMSE / DMSE switches out of the box.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X80SB FAQ
Yes - this is a double-rod cylinder, so a 12 mm rod exits both covers and every stroke uses the rod-side area. Force is 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, identical push and pull, with a peak of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi).
The ACED32X80SB uses the ISO 21287 short-body format with a hard-anodized aluminium body and S45C hard-chrome plated rods, cutting mounting length by about 50% versus an ISO 15552 profile cylinder. Fixed TPU bumpers absorb end-of-stroke energy at both ends. The S in the model code means the magnet is fitted, so CMSE / DMSE switches can be clipped into the body slots; without the -S code there is no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X80SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.