Airtac ACED Double-acting Compact Cylinder ACED32X90SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X90SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X90SB
The ACED32X90SB is a double acting, double-rod AirTAC compact cylinder built to ISO 21287: a 12 mm hard-chrome-plated S45C rod exits BOTH covers, so thrust is identical on the extend and retract strokes - 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in either direction. The male rod thread (B code) suits external rod couplings and knuckles, and the 1/8" PT port feeds the 32 mm bore. The optional -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches can be clipped straight onto the body.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs, guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke shock, the hard-anodized aluminium barrel resists wear, and the through-rod resists rotation and light side load while the rear rod can carry a sensor flag. Running 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), it delivers about 207 N of practical work at 0.5 MPa (the usual 60% planning figure) and lifts roughly 17 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED32X90SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X90SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X90SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X90SB Is Used
Reciprocating transfer between two stations
A gantry shuttle on a PCB test line uses the rear rod to drive a return flag while the front rod carries the tray gripper; equal 345.6 N thrust both ways keeps acceleration identical in each direction.
Symmetric press-fit of bushings
Pressing bronze bushings into aluminium housings needs the same force on entry and ejection - the through-rod gives 483.8 N at 0.7 MPa whichever way the piston runs, with the TPU bumper softening both ends.
Position-verified slide on a packaging machine
Because the -S magnet is fitted, two CMSE switches report fully-extended and fully-retracted on a carton pusher running at 300 mm/s, all inside a guard where the compact body saves half the mounting length.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X90SB the Right Cylinder?
At 345.6 N per direction this 32 mm bore sits between the 25 mm ACED (206.2 N) and the 40 mm ACED (571.8 N) at 0.5 MPa - step down for lighter pick-and-place, up for heavier clamping. The 90 mm stroke is well inside the 200 mm standard range for bore 32, so it ships as a catalogue item. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the male thread. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X90SB FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal either way: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a peak of 70.5 kgf at 1.0 MPa. In practice plan on about 207 N of real work at 0.5 MPa, which lifts roughly 17 kg vertically with a 2:1 margin. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
S means the optional magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches mount in the body slots; B means the 12 mm rod ends in a male thread instead of the female M8x1.25. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, the fixed TPU bumpers absorb end-of-stroke shock, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X90SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.