Airtac ACED Double-acting Compact Cylinder ACED40X110
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED40X110 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø40mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ40 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED40X110
The ACED40X110 is a double acting, double-rod compact cylinder built to ISO 21287: a 12 mm hard-chrome-plated S45C rod exits BOTH covers, so push and pull are identical - 571.8 N at 0.5 MPa and 800.5 N at 0.7 MPa in each direction. Air supply is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed runs 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight guarding and fixture plates. Because the through-rod resists rotation and side load, the free back-end rod can carry a sensor flag or a second tool. Plan on roughly 343 N (about 35 kg) of usable working force at 0.5 MPa, enough to lift about 29 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the hard-anodized aluminium body with roller-burnished bore resists wear.
Airtac ACED Double-acting Compact Cylinder ACED40X110 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED40X110 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø40 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 572 N |
| 0.7 MPa | 800 N |
| Max (@1.0 MPa) | 117 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED40X110
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED40X110 Is Used
Symmetric fixture clamping
Equal 571.8 N force in both directions lets one ACED40X110 clamp and then eject a machined housing in a CNC jig without reversing force calculations.
Reciprocating slide drive
The through-rod resists rotation on a pick-and-place slide, driving a 25 kg pallet back and forth at 30-500 mm/s with identical thrust each way.
Flag-carrying position feedback
The rear rod of the ACED40X110 mounts a flag plate that trips CMSE / DMSE switches (with the optional -S magnet) to confirm full retraction on a packaging line.
Is the Airtac ACED Double-acting Compact Cylinder ACED40X110 the Right Cylinder?
At 571.8 N per direction, the 40 mm bore sits between the 32 mm (345.6 N) and 50 mm (881.2 N) classes - step down for lighter clamping, up when the part mass demands more. The 110 mm stroke is well inside the 200 mm maximum standard stroke for this bore, so it ships as a catalog item. Ports are 1/8" and the female rod thread is M8x1.25. FA/FB flange, LB foot and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the 12 mm rod. Note that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put. Order the -S code if you need the optional magnet for CMSE / DMSE switches; this base model has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED40X110 FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal both ways: 571.8 N at 0.5 MPa and 800.5 N at 0.7 MPa, with a maximum of 116.6 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C on air filtered to 40 um.
The ACED40X110 uses the short ISO 21287 envelope - about 50% less mounting length than an ISO 15552 profile cylinder - with a hard-anodized aluminium body and a fixed TPU bumper at each end that decelerates the piston at stroke ends. Mounting is via FA/FB flange, LB foot or FTC brackets on the standard ISO 21287 face. Position sensing requires the optional -S magnet ordered with the cylinder; without it no CMSE / DMSE switch can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED40X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.