Airtac ACED Double-acting Compact Cylinder ACED40X175SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED40X175SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø40mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ40 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED40X175SB
The ACED40X175SB is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A 12 mm hard-chrome-plated S45C rod exits BOTH covers, so the 40 mm bore delivers 571.8 N at 0.5 MPa and 800.5 N at 0.7 MPa in either direction - both strokes work on the rod-side area, so push and pull are identical. The male rod thread (B code) and PT ports suit direct tooling attachment.
The hard-anodized aluminium body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is what lets a 175 mm stroke fit inside tight guarding and slide assemblies. The -S magnet is fitted on this model, so CMSE or DMSE switches can be clipped on for end-of-stroke signalling, and a fixed TPU bumper at each end absorbs stop impact. At 0.5 MPa the thrust equals about 58 kg of force, so plan on roughly 29 kg of vertical lift with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED40X175SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED40X175SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 572 N |
| 0.7 MPa | 800 N |
| Max (@1.0 MPa) | 117 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED40X175SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED40X175SB Is Used
Reciprocating shuttle table
The through-rod drives a small fixture slide from either end at 30-500 mm/s, with the rear rod carrying a position flag past a DMSE switch.
Symmetric press or rivet head
Equal 571.8 N force in both strokes suits a bench-top forming head that must strike with identical force on the return pass.
Gantry Z-axis lift
About 29 kg of vertical lift capacity at a 2:1 margin covers raising camera or dispensing heads inside compact machine frames.
Is the Airtac ACED Double-acting Compact Cylinder ACED40X175SB the Right Cylinder?
At 571.8 N per direction, this bore sits between the 32 mm (345.6 N) and 50 mm (881.2 N) double-rod classes - step down for lighter pick-and-place, up for heavier clamping. The 175 mm stroke is within the 200 mm standard range for bore 40, so no made-to-order build is needed. Remember the through-rod cannot hold position on lost air; add a rod lock or pilot check for suspended loads. FA/FB flanges, LB feet and I/Y knuckles bolt straight to the ISO 21287 face, and the fitted -S magnet enables CMSE / DMSE switch mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED40X175SB FAQ
Because a rod exits both covers, force is equal in both directions: 571.8 N at 0.5 MPa and 800.5 N at 0.7 MPa, on the rod-side area. Maximum force at 1.0 MPa is 116.6 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed range is 30-500 mm/s.
The ISO 21287 aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so a 175 mm stroke fits shallow slides and guarded cells. The -S magnet is fitted, so CMSE / DMSE switches mount in the body slots, and FA/FB flanges, LB feet and I/Y rod knuckles attach directly. A fixed TPU bumper at each end absorbs end-of-stroke impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED40X175SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.