Airtac ACED Double-acting Compact Cylinder ACED50X50SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED50X50SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø50mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED50X50SB
A double acting compact cylinder built to ISO 21287, the ACED50X50SB pushes a 50 mm bore through a 50 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is identical in both directions: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa. The through-rod resists rotation and modest side load, and the rear rod can carry a sensor flag or a second tooling plate.
The hard-anodized aluminium body with an S45C hard-chrome rod saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures. As a working rule, plan on about 528 N of real work at 0.5 MPa, which lifts roughly 27 kg vertically with a 2:1 margin. The S in the code means the magnet is fitted, so CMSE / DMSE switches can be clipped on, and male rod threading (the B code) is ready for external accessories.
Airtac ACED Double-acting Compact Cylinder ACED50X50SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED50X50SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED50X50SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED50X50SB Is Used
Symmetric press fixture
The equal 881.2 N output in both directions lets one ACED50X50SB clamp and then eject a machined aluminium housing without recalculating force per stroke.
Reciprocating transfer slide
A rod on each cover balances the moving carriage on an assembly-line shuttle, and the fitted magnet with a CMSE switch confirms both end positions over the 50 mm travel.
Label-head lowering station
On a packaging machine, the through-rod guides the label head straight down about 27 kg of effective vertical load at 0.5 MPa, with the TPU bumper softening each stop.
Is the Airtac ACED Double-acting Compact Cylinder ACED50X50SB the Right Cylinder?
At 881.2 N per direction this bore sits between the 40 mm frame (571.8 N at 0.5 MPa) and the 63 mm frame (1458.1 N at 0.5 MPa); step up if your tooling needs more than about 528 N of usable work. The 50 mm stroke is well inside the 250 mm maximum standard stroke for this bore. Remember the piston drifts when air is lost, so add a rod lock or pilot check for held loads. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face, and PT ports take standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED50X50SB FAQ
Output is equal in both directions because a rod exits each cover and both strokes use the rod-side area: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed range 30-500 mm/s.
S means the position magnet is fitted, so CMSE or DMSE reed or solid-state switches mount in the body slots; B means a male rod thread instead of female. The ISO 21287 compact body is hard-anodized aluminium with an S45C hard-chrome rod, about 50% shorter in mounting length than an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and 1/8" PT ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED50X50SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.