Airtac ACED Double-acting Compact Cylinder ACED50X70
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED50X70 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø50mm bore and 70mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED50X70
The ACED50X70 is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A 16 mm hard-chrome-plated S45C rod exits BOTH covers, so the 50 mm bore delivers an identical 881.2 N at 0.5 MPa (1233.7 N at 0.7 MPa) in either direction - there is no push/pull imbalance because both strokes work on the rod-side area. The through-rod also resists rotation and side load, and the rear rod end gives you a free spot to carry a sensor flag.
The hard-anodized aluminium body with roller-burnished bore and fixed TPU bumpers at both ends runs at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s and -20 to +70 C on air filtered to 40 um. Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight clamping fixtures and gantries. In practice, plan on roughly 529 N of usable work at 0.5 MPa, which lifts about 27 kg vertically with a 2:1 margin. Note: this code has no magnet fitted - order the optional -S version if you need CMSE / DMSE switch positions.
Airtac ACED Double-acting Compact Cylinder ACED50X70 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED50X70 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED50X70
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED50X70 Is Used
Press-fit clamping of bearing housings
The symmetric 881.2 N push and pull at 0.5 MPa lets one ACED50X70 press a bearing into a housing and retract the arbor with equal force on an assembly bench.
Reciprocating carriage on a pick-and-place gantry
A rod at both ends gives mirrored mount points and rotation resistance, so the 70 mm stroke can drive a carriage forward and back at 30-500 mm/s without an anti-rotation guide.
Case erecting flap tucker on a carton line
The rear rod carries a flag for a position check (with the optional -S magnet and a CMSE switch), while the front rod folds flaps with about 529 N of usable force.
Is the Airtac ACED Double-acting Compact Cylinder ACED50X70 the Right Cylinder?
At 881.2 N per direction at 0.5 MPa, the 50 mm bore sits mid-range: step down to the 40 mm ACED (571.8 N) for lighter clamps, or up to the 63 mm (1458.1 N) for heavier press-fit work. The 70 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so it ships as a catalogue item. If the machine must hold position when air is lost, add a rod lock or pilot check valve - the bare cylinder will drift. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face, and the female M10x1.5 rod thread takes standard I or Y knuckles. Remember the -S code if CMSE / DMSE sensing is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED50X70 FAQ
Yes - it is a double-rod cylinder, so force is identical both ways: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa (rod-side area on both strokes). At the 1.0 MPa maximum that equals about 179.7 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, on air filtered to 40 um, at 30-500 mm/s and -20 to +70 C.
It is an ISO 21287 compact cylinder - the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder - with a hard-anodized aluminium body and a fixed TPU bumper at each end that only decelerates the piston at stroke ends. FA/FB flanges, LB feet and FTC brackets mount on the standard face; the rod thread is female M10x1.5 and the port is 1/8" PT. This code has no magnet, so no switch can be read - order the optional -S version to enable CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED50X70
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.