Airtac ACED Double-acting Compact Cylinder ACED63X110
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X110 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X110
A double acting compact cylinder built to ISO 21287, the ACED63X110 pushes a 16 mm rod out of BOTH covers, so the 63 mm bore delivers the same 1458.1 N at 0.5 MPa (2041.3 N at 0.7 MPa) on every stroke - there is no weaker pull side. The hard-anodized aluminium body with a roller-burnished bore and the S45C hard-chrome plated rod run at 30-500 mm/s on air filtered to 40 um, across 0.15-1.0 MPa (22-145 psi) and -20 to +70 C.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight welding fixtures and press gantries. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the through-rod resists rotation so the back rod can carry a sensor flag. Plan on roughly 875 N of real work at 0.5 MPa (about 60% of rating), which lifts about 74 kg vertically with a 2:1 margin. Note: without the optional -S magnet no CMSE/DMSE switch can be fitted, and if air is lost the piston drifts - add a rod lock or pilot check to hold a load.
Airtac ACED Double-acting Compact Cylinder ACED63X110 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X110 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X110
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X110 Is Used
Weld fixture clamping from both sides
The 63 mm through-rod clamps a steel bracket against the front anvil while the rear rod drives a locating pin, giving 1458.1 N each way in one compact 110 mm-stroke body.
Press-off ejector on a stamping die
About 875 N of usable force at 0.5 MPa ejects finished parts off the die face, and the symmetric double-rod mount keeps the push square to the tooling plate.
Counterbalanced lift-assist arm
The rear rod carries the position flag while the front rod lifts about 74 kg vertically with a 2:1 margin; add a pilot check because the cylinder will not hold position if air drops.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X110 the Right Cylinder?
At 1458.1 N @0.5 MPa this bore 63 sits between the 50 mm (881.2 N) and 80 mm (2356.2 N) double-rod sizes; step down for lighter clamping, up for heavy lift-and-lower tooling. The 110 mm stroke is well inside the 250 mm standard limit for this bore, so it ships as a catalog item. Choose the female M10x1.5 rod thread (this code) or add B for male thread; FA/FB flanges, LB feet and I/Y rod knuckles bolt to the ISO 21287 face. Order the -S suffix only if you need CMSE/DMSE switch sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X110 FAQ
Yes - it is a double-rod cylinder, so a 16 mm rod exits both covers and every stroke uses the rod-side area of the 63 mm bore. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal push and pull, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow fixtures and guarded machines. Sensing is optional: order the -S code to get the magnet for CMSE/DMSE switches; this model without -S has no magnet fitted. Mounting uses FA/FB flanges, LB feet and I/Y knuckles on the standard ISO 21287 face, and a fixed TPU bumper at each end absorbs end-of-stroke impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.