Airtac ACED Double-acting Compact Cylinder ACED63X110S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X110S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X110S
The ACED63X110S is a double acting, double-rod ISO 21287 compact cylinder: a 16 mm piston rod exits both covers, so the 63 mm bore delivers the same 1458.1 N at 0.5 MPa (2041.3 N at 0.7 MPa) on every stroke, in either direction. The -S code means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped anywhere along the body slots for end-of-stroke or mid-stroke sensing. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s, and a fixed TPU bumper sits at both ends.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore class fits so well inside press fixtures, lift stations and guarded gantry cells. The hard-anodized aluminium body carries a hard-chrome plated S45C rod, and the through-rod resists rotation and side load while the rear rod end gives you a free mounting point or a sensor flag carrier. As a sizing guide, treat roughly 875 N as the practical working force at 0.5 MPa, which lifts about 74 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED63X110S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X110S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X110S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X110S Is Used
Pallet lift-and-lower station
The symmetric 1458.1 N output in both directions suits a vertical lift mast on a packaging line, raising about 74 kg of pallet fixture with a 2:1 margin at 0.5 MPa, with CMSE switches reporting top and bottom positions.
Reciprocating transfer carriage
A rod on each end of the 110 mm stroke lets the carriage be driven or guided from either side in a conveyor cross-transfer module, with equal force whichever way it travels at 30-500 mm/s.
Weld fixture clamp beam
Mounted under a weld cell guard where a full-length profile cylinder will not fit, the compact body clamps a fixture beam with about 875 N of usable force at 0.5 MPa, sensed by a DMSE switch via the fitted magnet.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X110S the Right Cylinder?
At 63 mm bore you sit mid-range in the ACED family: a 50 mm bore gives 881.2 N at 0.5 MPa and an 80 mm bore gives 2356.2 N, so step up only if your part weight or clamp force truly demands it. Remember this is a plain double-rod cylinder - if the load must stay put when air is lost, add a rod lock or pilot check valve rather than relying on the cylinder itself. Mounting bolts straight to the ISO 21287 face: FA/FB flange, LB foot or FTC brackets, with I and Y rod knuckles on the rod ends. This model already carries the optional -S magnet; order plain ACED63X110 only if you do not need switching.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X110S FAQ
Yes - because a 16 mm rod exits both covers, both strokes use the rod-side area of the 63 mm bore. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal in extend and retract, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed 30-500 mm/s.
The ACED63X110S is an ISO 21287 compact cylinder with a hard-anodized aluminium body and S45C hard-chrome rod, about 50% shorter in mounting length than an ISO 15552 profile cylinder. Fixed TPU bumpers at both ends absorb end-of-stroke energy. The -S code on this model means the magnet is fitted, so CMSE or DMSE switches can be mounted in the body slots; FA/FB flange, LB foot and FTC mounting plus I/Y rod knuckles bolt to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.