Airtac ACED Double-acting Compact Cylinder ACED63X110SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X110SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X110SB
A double acting compact cylinder with a rod leaving both covers, the ACED63X110SB delivers 1458.1 N in each direction at 0.5 MPa because both strokes work on the rod-side area. The 63 mm bore and 110 mm stroke sit inside the ISO 21287 short body, which saves about 50% of the mounting length of an ISO 15552 profile cylinder - useful when a gantry or guarding panel leaves no room for a full-length body. This -S version carries the optional magnet, so CMSE or DMSE switches can be clipped on for end-of-stroke signals.
The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag or a second tooling plate. A hard-anodized aluminium body with a roller-burnished bore runs against an S45C hard-chrome-plated rod, and fixed TPU bumpers absorb end-of-stroke shock at both covers. As a rule of thumb, plan on roughly 875 N (about 89 kg of vertical lift) of real working force at 0.5 MPa rather than the full 1458.1 N rating.
Airtac ACED Double-acting Compact Cylinder ACED63X110SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X110SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X110SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X110SB Is Used
Symmetric weld-fixture clamping
The through-rod lets a press die or weld fixture clamp from either cover with identical 1458.1 N force, so one cylinder serves two stations without re-plumbing.
Pusher arms on packaging lines
A 110 mm stroke at 30-500 mm/s sweeps cartons off a conveyor; the rear rod drives a flag past a DMSE switch for cycle confirmation.
Test-rig load cycling
Equal force in both directions makes the ACED63X110SB a clean actuator for fatigue rigs that push and pull a specimen with the same 1458.1 N profile.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X110SB the Right Cylinder?
At 1458.1 N per direction the 63 mm bore suits clamping and pressing in the 100-150 kg class; step down to the 50 mm bore (881.2 N at 0.5 MPa) for lighter fixtures or up to the 80 mm bore (2356.2 N) when the job needs more muscle. The 110 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so it ships as a catalogue item. Mount with FA/FB flanges, LB feet or FTC brackets on the ISO 21287 face, and pair I or Y rod knuckles with the male B-thread rod end. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X110SB FAQ
No - the double-rod design puts a 16 mm rod on both covers, so both strokes use the rod-side area and the force is identical each way: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, and a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and the 1/8" port is fixed by the 63 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flange, LB foot and FTC brackets bolt straight to the standard face. This -S model carries the optional magnet, so CMSE or DMSE reed or solid-state switches mount in the body slots; models ordered without -S have no magnet. Fixed TPU bumpers at both ends absorb end-of-stroke impact, and the male B-code rod thread takes an I or Y knuckle directly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X110SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.