Airtac ACED Double-acting Compact Cylinder ACED63X125
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X125 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 125mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke125 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X125
A double acting compact cylinder built to ISO 21287, the ACED63X125 pushes a 63 mm piston through a 125 mm stroke with a rod leaving BOTH covers, so thrust is identical on every stroke: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag or a second tool. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs and gantries.
The hard-anodized aluminium body pairs with an S45C hard-chrome plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. At 0.5 MPa the rod-side thrust of 1458.1 N equals roughly 148 kgf, so halving for a 2:1 margin lets you lift about 74 kg vertically with margin to spare. Speed range is 30-500 mm/s across 0.15-1.0 MPa (22-145 psi) of clean, 40 um filtered air. The magnet is not fitted on this code; order the optional -S version if you need CMSE / DMSE switch positions.
Airtac ACED Double-acting Compact Cylinder ACED63X125 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X125 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 125 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X125
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X125 Is Used
CNC fixture clamping
Symmetric 1458.1 N force at 0.5 MPa lets one cylinder clamp and unclamp a machined housing from either side of the jig without re-plumbing.
Packaging line pushers
The 125 mm stroke and 30-500 mm/s speed suit diverting cartons on a bottling conveyor, with the rear rod driving a position flag.
Battery handling gantry
Lifts about 74 kg vertically with a 2:1 margin, enough for raising battery trays or lids on an assembly gantry.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X125 the Right Cylinder?
At 1458.1 N per direction at 0.5 MPa, this 63 mm bore sits between the 50 mm size (881.2 N) and the 80 mm size (2356.2 N), so step down for lighter presses or up for heavier clamping. The 125 mm stroke is well inside the 250 mm standard limit for this bore. Remember the piston drifts if air is lost - for a held load add a rod lock or pilot check valve. Mount with FA/FB flanges, LB foot or FTC brackets plus I/Y rod knuckles, and specify the -S code if CMSE / DMSE sensing is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X125 FAQ
Because a rod exits both covers, force is equal in both directions: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the air must be filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow guards and tight fixtures. Sensing needs the optional -S magnet code; this standard ACED63X125 has no magnet, so CMSE / DMSE switches only work on the -S variant. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the female M10x1.5 rod thread with 1/8" PT ports keeps plumbing simple.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X125
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.