Airtac ACED Double-acting Compact Cylinder ACED63X150
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X150 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X150
The ACED63X150 is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format: a 63 mm bore with a 16 mm rod leaving BOTH covers, so the through-rod sees the rod-side area on every stroke and delivers an equal 1458.1 N at 0.5 MPa in each direction. Its hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight gantries and slide assemblies a full-length body cannot fit.
In service terms the 1458.1 N rating at 0.5 MPa works out to roughly 875 N of practical working force when you keep a 40% margin, and the same figure corresponds to lifting about 74 kg vertically even after halving for a 2:1 safety factor. The S45C hard-chrome-plated rod, grease-retaining two-way piston seal and fixed TPU bumpers at both ends keep it running at 30-500 mm/s on air filtered to 40 um, across 0.15-1.0 MPa (22-145 psi) and -20 to +70 C. Position sensing is not fitted on this code: add the optional -S magnet if you want CMSE / DMSE switches.
Airtac ACED Double-acting Compact Cylinder ACED63X150 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X150 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X150
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X150 Is Used
Reciprocating transfer slide
A through-rod slide on an electronics assembly line: the back rod carries the tooling plate while the front rod drives a fixture, both ends pushing a matched 1458.1 N at 0.5 MPa so the stroke profile stays identical in each direction.
Twin-sided press fixture
Clamping aluminium extrusions from two sides of a welding jig: the 63 mm double rod applies equal force to both workpiece faces, and the short ISO 21287 body fits between the jig rails where a longer cylinder would foul.
Counterbalanced lift assist
A pallet-stacking assist arm needs the same push and pull force to raise and lower a 70 kg carriage; the rod-side area on both strokes gives symmetric force, with a pilot check valve added because the cylinder alone will not hold position.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X150 the Right Cylinder?
At 63 mm bore this sits in the mid-heavy class: step down to the 50 mm bore (881.2 N at 0.5 MPa) for lighter clamping, or up to the 80 mm bore (2356.2 N at 0.5 MPa) when the 150 mm stroke must move a heavier slide. The 150 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so it ships as a catalogue item. Remember the piston will drift if air is lost, so pair it with a rod lock or pilot check valve for held loads. Mount it on the ISO 21287 face with FA/FB flanges, LB feet or FTC brackets, and order the -S code if your control loop needs CMSE / DMSE switch feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X150 FAQ
No, the two are identical. Because a 16 mm rod exits both covers, every stroke works on the rod-side area of the 63 mm piston: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal in both directions. At the full 1.0 MPa rating the cylinder reaches a maximum of 297.4 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed range is 30-500 mm/s.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body with roller-burnished bore, S45C hard-chrome rod through both covers, threaded aluminium covers, and a fixed TPU bumper at each end that absorbs end-of-stroke energy. Air ports are 1/8" PT, the female rod thread is M10x1.5, and mounting brackets bolt to the ISO 21287 face. Switches are possible only with the optional -S magnet code, which enables CMSE / DMSE reed or solid-state sensors; without -S there is no magnet in the piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.