Airtac ACED Double-acting Compact Cylinder ACED63X150S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X150S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X150S
A double acting ISO 21287 compact cylinder with a through rod, the ACED63X150S pushes 1458.1 N in each direction at 0.5 MPa because both strokes work on the rod-side area of the 63 mm bore. The 16 mm rod exits both covers, so the piston resists rotation and light side load, and the rear rod can carry a sensor flag or a second tooling plate. At 0.7 MPa the same cylinder delivers 2041.3 N either way.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters inside pick-and-place gantries and machine guards where every millimetre of envelope counts. The hard-anodized aluminium body carries a fixed TPU bumper at each end, and the S45C hard-chrome rod runs at 30-500 mm/s between 0.15-1.0 MPa (22-145 psi). As an S-code model the magnet is already fitted, so CMSE or DMSE reed and solid-state switches mount directly in the body slots. Working from the 1458.1 N figure, expect roughly 875 N of real work at 0.5 MPa, which lifts about 74 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED63X150S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X150S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X150S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X150S Is Used
Gantry pick-and-place
The through rod carries a tooling plate on both ends of a Z-axis gantry, lifting about 74 kg of parts per cycle with equal force up and down at 0.5 MPa.
Press-fit fixture
1458.1 N in each direction seats bushings into aluminium housings on an assembly line, with the rear rod driving a part-eject pin on the return stroke.
End-of-stroke signalling
The fitted magnet lets CMSE or DMSE switches confirm full extension and retraction of a 150 mm transfer slide on an automated packaging machine.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X150S the Right Cylinder?
Size between the ACED50X150S at 881.2 N and the ACED80X150S at 2356.2 N, both at 0.5 MPa; the 63 mm bore sits squarely in the middle for medium clamping and transfer duty. Note that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check valve if the 150 mm stroke must hold a position. Mount on FA/FB flanges, LB feet or FTC brackets with I or Y rod knuckles, and the 150 mm stroke sits well inside the 250 mm maximum standard stroke for this bore.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X150S FAQ
Output is equal both ways because a rod exits each cover and both strokes use the rod-side area: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a peak of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, air filtered to 40 um, speed 30-500 mm/s and -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy. The S code means the magnet is fitted, so CMSE or DMSE switches mount in the body slots, and FA/FB flanges, LB feet, FTC brackets plus I/Y rod knuckles bolt to the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.