Airtac ACED Double-acting Compact Cylinder ACED63X15S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X15S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X15S
The ACED63X15S is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A 16 mm rod exits both covers, so output force is equal in both directions: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, either way. The through-rod resists rotation and light side load, and the rear rod end can carry a sensor flag or a second tool. At 0.5 MPa that force lifts about 148 kg vertically, or roughly 74 kg with a 2:1 margin - enough to match a real part weight before you buy.
The hard-anodized aluminium body with an S45C hard-chrome-plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, -20 to +70 C. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and gantries. This model carries the optional -S magnet, so CMSE / DMSE switches can be mounted for end-of-stroke detection, and a fixed TPU bumper sits at both ends.
Airtac ACED Double-acting Compact Cylinder ACED63X15S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X15S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X15S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X15S Is Used
Short-stroke press fitting
A 15 mm stroke with 1458.1 N at 0.5 MPa both ways suits pressing bearings or bushings into small housings on an assembly bench, with the TPU bumper absorbing the end-of-stroke shock.
Gantry pick-and-place with sensing
The fitted -S magnet accepts CMSE / DMSE switches so a PLC can confirm both stroke ends, while the rear rod carries a flag - useful in electronics assembly gantries where space is tight.
Symmetric lift in packaging fixtures
Equal force in both directions lets one cylinder raise and lower a forming mandrel in a packaging machine, lifting roughly 74 kg vertically with a 2:1 margin at 0.5 MPa.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X15S the Right Cylinder?
For a 15 mm stroke doing around 875 N of real work at 0.5 MPa (about 0.6 of the rating), the 63 mm bore is well matched; step down to the 50 mm bore (881.2 N at 0.5 MPa) for lighter clamping, or up to the 80 mm bore (2356.2 N) for heavier presses. The through-rod gives a symmetric mount and the rear rod can drive a flag for position sensing. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must be held. FA/FB flange, LB foot and FTC brackets bolt straight to the ISO 21287 face, and I/Y rod knuckles suit the 16 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X15S FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so force is equal either way: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow jigs and guards. This model carries the optional -S magnet, so CMSE or DMSE reed / solid-state switches clamp into the body slots for end-of-stroke detection. FA/FB flange, LB foot and FTC brackets mount on the standard face; the rod end is female M10x1.5 with a 1/8" port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X15S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.