Airtac ACED Double-acting Compact Cylinder ACED63X15SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X15SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X15SB
A double acting compact cylinder built to ISO 21287, the ACED63X15SB pushes a 16 mm hard-chromed rod out of BOTH covers, so thrust is identical on the extend and return strokes: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa either way. The male rod thread (B code) bolts straight to tooling, and the through-rod resists rotation and side load while the rear rod can carry a sensor flag.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight welding fixtures and press gantries. The hard-anodized aluminium body with a roller-burnished bore runs at 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, with fixed TPU bumpers absorbing end-of-stroke shock at both ends. Because the -S magnet is fitted on this model, CMSE or DMSE switches can be clipped onto the body slots for end-position sensing. At 0.5 MPa the rod-side area equates to roughly 148 kg of thrust, so plan on about 89 kg of real work once a 0.6 margin is applied - enough to index a 60-70 kg pallet or clamp a heavy weldment.
Airtac ACED Double-acting Compact Cylinder ACED63X15SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X15SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X15SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X15SB Is Used
Weld fixture clamping
The symmetric 1458.1 N clamp force in both directions lets one ACED63X15SB hold a steel weldment from either side of a robotic welding jig, with the rear rod driving a position flag.
Pallet indexing on conveyor lines
A 15 mm stroke is ideal for short stopper-bar lifts; the through-rod keeps the stopper bar square under the roughly 148 kg thrust available at 0.5 MPa.
Press-to-fit ejection
In electronics assembly, the back-end rod ejects a finished connector housing while the front rod retracts the nest, both strokes delivering equal 2041.3 N force at 0.7 MPa.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X15SB the Right Cylinder?
At 63 mm bore this model delivers 1458.1 N at 0.5 MPa in both directions; step down to a 50 mm bore (881.2 N) for lighter clamping or up to an 80 mm bore (2356.2 N) for heavy press work. The 15 mm stroke suits short-tramp positioning and is well inside the 250 mm maximum standard stroke for this bore. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the male thread; PT ports are standard, or order the G version.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X15SB FAQ
Yes - this is a double-rod cylinder, so a 16 mm rod exits both covers and both strokes use the rod-side area. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa in EITHER direction, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
It follows ISO 21287, the short-stroke compact standard, so it needs about 50% less mounting length than an ISO 15552 profile cylinder of the same bore. The hard-anodized aluminium body carries magnet slots, and this -S model includes the magnet, so CMSE or DMSE reed or solid-state switches mount directly for end-position signals. FA/FB flanges, LB feet and FTC brackets bolt to the standard face, and the male rod thread accepts I or Y knuckles. A fixed TPU bumper at each end absorbs end-of-stroke impact; it does not lock or hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X15SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.