Airtac ACED Double-acting Compact Cylinder ACED63X175
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X175 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X175
The ACED63X175 is a double acting, double-rod compact cylinder built to ISO 21287: a 63 mm bore with a 16 mm rod exiting BOTH covers, so the output force is equal in both directions because each stroke works on the rod-side area. At 0.5 MPa it delivers 1458.1 N either way, rising to 2041.3 N at 0.7 MPa. The hard-anodized aluminium body with S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 175 mm stroke fits tight gantries and guarded stations where a full-length body will not. The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag. A fixed TPU bumper at each end absorbs end-of-stroke energy. In practice, keep real work to about 875 N (0.6 of the 0.5 MPa rating), which means this bore lifts roughly 74 kg vertically with a 2:1 margin. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt straight to the ISO 21287 face.
Airtac ACED Double-acting Compact Cylinder ACED63X175 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X175 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X175
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X175 Is Used
Gantry lift-and-lower station
With 1458.1 N available in both directions, the through-rod lifts and lowers a 60 kg pallet fixture on a pick-and-place gantry, the symmetric rod keeping the load level without a guide plate.
Aluminium extrusion press-off
At 0.7 MPa the 2041.3 N rod-side force presses finished extrusions off a forming die; the 175 mm stroke clears the die set for loading and the TPU bumpers tame the return.
Bottle-capper height adjust
On a bottling line, the rear rod carries a flag for switch position feedback when the -S magnet is ordered, letting CMSE switches track capper height changes at 30-500 mm/s.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X175 the Right Cylinder?
Size by force: the 50 mm bore gives 881.2 N at 0.5 MPa, while stepping up to 80 mm reaches 2356.2 N, so 63 mm at 1458.1 N sits in the middle for medium clamping and lift duties. The 175 mm stroke is within the 250 mm standard range for this bore, so no made-to-order build is needed. Remember that a plain double-rod cylinder drifts when air is lost - for a held load add a rod lock or pilot check. If you need CMSE or DMSE switches, order the -S code; without it there is no magnet and no sensing. Female M10x1.5 rod thread and 1/8" ports come as standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X175 FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal both ways: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames. Sensing is optional: order the -S code to get the magnet for CMSE or DMSE switches - without -S there is no magnet. Mounting uses FA/FB flange, LB foot or FTC brackets plus I/Y rod knuckles, and a fixed TPU bumper sits at each end of the 175 mm stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.