Airtac ACED Double-acting Compact Cylinder ACED63X175S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X175S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X175S
The ACED63X175S is a double acting, double-rod compact cylinder built to ISO 21287: a 16 mm rod leaves both the front and rear cover, so thrust is identical on every stroke. At 0.5 MPa it delivers 1458.1 N in either direction (2041.3 N at 0.7 MPa), and the through-rod resists rotation and side load while the free back-end rod can carry a sensor flag. The 175 mm stroke sits inside the 250 mm standard range for the 63 mm bore, so it ships as a catalogue item.
The hard-anodized aluminium body is roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, which is why machine builders pick it for tight gantries and guarding. This -S version carries the optional magnet, so CMSE or DMSE reed or solid-state switches mount directly in the body slots. A fixed TPU bumper at each end absorbs end-of-stroke energy, and with 1458.1 N at hand you can plan on roughly 875 N (about 89 kg) of real working force, or lift roughly 74 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED63X175S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X175S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X175S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X175S Is Used
Reciprocating pallet pusher
The 175 mm stroke and equal 1458.1 N force both ways let one cylinder push a pallet into a fixture and retract it with identical thrust, no reverse regulator needed.
Gantry Z-axis with mid-stroke flag
The rear rod carries a flag past a DMSE switch, so a packaging line can confirm intermediate positions on the 175 mm travel without extra hardware.
Clamp-and-eject station
In a machining cell, the through-rod handles side load on a sliding ejector plate, with the TPU bumpers absorbing the hit at each end of the 175 mm stroke.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X175S the Right Cylinder?
Size up or down by force: the 50 mm double-rod version gives 881.2 N at 0.5 MPa, while the 80 mm bore reaches 2356.2 N - this 63 mm model sits between them at 1458.1 N both ways. Remember that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check if the load must stay put. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and the fitted magnet pairs with CMSE / DMSE switches for end-of-stroke or mid-stroke sensing. Ports are 1/8" (PT thread), the rod end is female M10x1.5, and speed runs 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X175S FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa in either direction. At 1.0 MPa the peak is 297.4 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The S in ACED63X175S means the optional -S magnet is fitted, so CMSE or DMSE reed or solid-state switches clip into the body slots for position feedback. Mounting hardware for the ISO 21287 face includes FA/FB flanges, LB feet and FTC brackets, with I and Y rod knuckles on the 16 mm rod. The body is about 50% shorter than an ISO 15552 profile cylinder, and the fixed TPU bumpers at both ends soften end-of-stroke contact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.