Airtac ACED Double-acting Compact Cylinder ACED63X200
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X200 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X200
A double acting compact cylinder built to ISO 21287, the ACED63X200 pushes a 63 mm bore through a 200 mm stroke with a rod leaving both covers, so the through-rod delivers the same 1458.1 N at 0.5 MPa (2041.3 N at 0.7 MPa) on every stroke. Because both sides of the piston see the rod-side area, there is no push-versus-pull mismatch to compensate for in your force budget.
The hard-anodized aluminium body with an S45C hard-chrome plated rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, with a fixed TPU bumper at each end. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight gantries and guarding. For sizing, treat roughly 875 N (about 60% of the 0.5 MPa rating) as the working force, which corresponds to lifting around 74 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED63X200 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X200 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X200
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X200 Is Used
Reciprocating transfer carriage
A through-rod on a 200 mm stroke shuttles pallet fixtures back and forth on an assembly rail; the rear rod carries a sensor flag while the front rod does the pushing at 1458.1 N.
Counterbalanced press riser
Equal force up and down suits a die-cart lift table needing 148 kg of theoretical lift, with about 74 kg handled comfortably at a 2:1 margin.
Symmetric clamp fixture
On a CNC fixture plate, the double rod clamps from both covers with identical 2041.3 N at 0.7 MPa, keeping the jig balanced without recalculating pull force.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X200 the Right Cylinder?
At 1458.1 N per side, the 63 mm bore sits between the 50 mm bore (881.2 N at 0.5 MPa) and the 80 mm bore (2356.2 N at 0.5 MPa); step down if your load is under 850 N, step up if you need more than 1500 N. The 200 mm stroke is within the 250 mm maximum standard stroke for this bore, so no made-to-order length is needed. Mount on the ISO 21287 face with FA/FB flanges, LB foot or FTC brackets plus I/Y rod knuckles, and add the optional -S magnet at ordering time if you want CMSE or DMSE switches - without that code there is no magnet fitted. If the load must stay put when air is lost, pair the cylinder with a rod lock or pilot check valve, since a plain double-rod cylinder will drift.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X200 FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal both ways: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body and S45C hard-chrome rod, about 50% shorter in mounting length than an ISO 15552 profile cylinder. Fixed TPU bumpers at both ends absorb end-of-stroke energy. It bolts to FA/FB flanges, LB foot or FTC brackets with I/Y rod knuckles on the standard face. Position sensing requires the optional -S magnet code; with plain ACED63X200 no magnet is fitted, so CMSE or DMSE switches cannot be used. The 1/8" port and M10x1.5 female rod thread suit standard fittings.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.