Airtac ACED Double-acting Compact Cylinder ACED63X200S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X200S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X200S
A double acting compact cylinder built to ISO 21287, the ACED63X200S pushes a 16 mm rod out of BOTH covers, so the 63 mm bore delivers an identical 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa on every stroke - the rod-side area is the only working area. Air supply is 0.15-1.0 MPa (22-145 psi), speed runs 30-500 mm/s, and a fixed TPU bumper at each end takes the end-of-stroke hit.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight gantries and guarding where a full-length body cannot. The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag. This S-coded unit carries the optional -S magnet, so CMSE / DMSE switches mount directly on the body slots. Hard-anodized aluminium body, S45C hard-chrome plated rod, 1/8" ports.
Airtac ACED Double-acting Compact Cylinder ACED63X200S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X200S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X200S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X200S Is Used
Reciprocating transfer gantry
The through-rod drives a carriage symmetrically on both strokes, so a pick-and-place gantry sees the same 1458.1 N accelerating in either direction at 0.5 MPa.
Clamp-and-flip welding fixture
Equal force both ways lets one cylinder clamp a steel bracket on the forward stroke and eject the finished weldment on the return, with the rear rod carrying a DMSE switch flag for position confirmation.
Battery-change lift table
With about 74 kg of vertical lift at a 2:1 margin, the 200 mm stroke raises a forklift battery roller cradle in a maintenance bay, guided by the rotation-resistant double rod.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X200S the Right Cylinder?
At 1458.1 N per side, plan on roughly 875 N (about 89 kg of push) as the usable working force at 0.5 MPa, keeping a margin for friction and load variation. Expressed as vertical lift, the raw rating is about 148 kgf, so halving for a 2:1 margin lets it lift about 74 kg vertically. Need less force? The 50 mm bore gives 881.2 N at 0.5 MPa; need more? The 80 mm bore reaches 2356.2 N. The 200 mm stroke sits inside the 250 mm standard range for bore 63, so no made-to-order build is needed. FA/FB flange, LB foot and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the 16 mm rod. Note that with air removed the piston drifts - add a rod lock or pilot check if the load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X200S FAQ
Because a rod exits both covers, output is identical on the extend and return strokes: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, both ways, from the rod-side area of the 63 mm bore. At 1.0 MPa the peak rating is 297.4 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed spans 30-500 mm/s.
The S shows this unit carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches click into the body slots for end-of-stroke or mid-stroke signalling; models without the S code have no magnet. The fixed TPU bumper at each end only decelerates the piston at stroke ends. FA/FB flanges, LB foot and FTC brackets mount on the ISO 21287 face, and the female M10x1.5 rod thread accepts I or Y knuckles. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.