Airtac ACED Double-acting Compact Cylinder ACED63X200SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X200SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X200SB
A double acting ISO 21287 compact cylinder with a rod leaving both covers, the ACED63X200SB pushes with the same 1458.1 N at 0.5 MPa (2041.3 N at 0.7 MPa) in either direction, because both strokes work on the rod-side area of the 63 mm piston. The male-threaded 16 mm rod at each end resists rotation and side load, and the back rod can carry a sensor flag on gantry or pick-and-place axes. Speed range is 30-500 mm/s over a 200 mm stroke.
The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), with fixed TPU bumpers at both ends. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames. This -S version carries the optional magnet, so CMSE / DMSE reed or solid-state switches can be clipped on for end-of-stroke signals. As a rule of thumb, plan on roughly 875 N of usable push at 0.5 MPa, which is about 74 kg held vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED63X200SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X200SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X200SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X200SB Is Used
Reciprocating conveyor pushers
The equal 1458.1 N thrust in both directions keeps divert and return strokes identical on packaging lines, with the 200 mm stroke clearing a full lane width.
Gantry Z-axis part transfer
The back rod carries a sensor flag while the front male-threaded rod lifts about 74 kg of fixture weight vertically with a 2:1 margin at 0.5 MPa.
Machine tool door actuation
The short ISO 21287 body fits inside tight guarding where a full-length ISO 15552 profile cylinder will not, and CMSE switches confirm open and closed positions.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X200SB the Right Cylinder?
At 1458.1 N per side at 0.5 MPa, this 63 mm bore suits mid-load axes; step down to the 50 mm bore (881.2 N) for lighter fixtures or up to the 80 mm bore (2356.2 N) when the part weight climbs. The 200 mm stroke sits inside the 250 mm maximum standard stroke for this bore, so no made-to-order build is needed.
Remember the through-rod does not lock anything: if the axis must hold position with air off, pair it with a rod lock or pilot check valve. FA/FB flanges, LB feet, CA clevis and FTC brackets bolt straight to the ISO 21287 face, and the fitted -S magnet lets CMSE / DMSE switches report stroke position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X200SB FAQ
Because a rod exits both covers, force is equal in both directions: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa on each stroke, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) and proof pressure is 1.5 MPa (215 psi).
The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches mount in the body slots for stroke signals. FA/FB flanges, LB feet, CA clevis and FTC brackets attach to the ISO 21287 face, and the fixed TPU bumpers at both ends simply decelerate the piston at stroke ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X200SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.