Airtac ACED Double-acting Compact Cylinder ACED63X250B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X250B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 250mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke250 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X250B
A double acting compact cylinder with a rod leaving both covers, the ACED63X250B delivers the same 1458.1 N at 0.5 MPa in either direction because both strokes work on the rod-side area of the 63 mm bore. The through-rod fights rotation and side load and gives a symmetric mounting face, while the back-end rod can carry a sensor flag on gantry or clamp tooling. Its hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it slots into tight fixtures a full-length body cannot reach.
At 0.7 MPa the same bore pushes and pulls 2041.3 N, and the ceiling at 1.0 MPa is 297.4 kgf. In practice, plan on roughly 875 N of real work at 0.5 MPa, which is about 89 kg of vertical lift with a 2:1 margin. Speed range is 30-500 mm/s, a fixed TPU bumper sits at each end, and the S45C hard-chrome rod runs in a roller-burnished, hard-anodized bore for long seal life.
Airtac ACED Double-acting Compact Cylinder ACED63X250B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X250B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X250B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X250B Is Used
Reciprocating conveyor pushers
The through-rod carries a pusher pad on the front rod and a position flag on the rear rod, moving cartons between lanes at up to 500 mm/s with equal 1458.1 N force in both travel directions.
Gantry Z-axis part ejectors
On CNC tending gantries, the symmetric double-rod mount resists the side load of ejecting machined housings, and the short ISO 21287 body fits inside the Z-slide envelope.
Pallet-stacker gate actuators
Warehouse safety gates and pallet stops use the 250 mm stroke and 2041.3 N at 0.7 MPa to swing or lift barriers, with the rear rod driving a limit-switch flag when the -S magnet is ordered.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X250B the Right Cylinder?
If 1458.1 N at 0.5 MPa is more than the job needs, the 50 mm double-rod version gives 881.2 N; if you need more, step up to the 80 mm bore at 2356.2 N. This model has a male rod thread (B code) and a PT port thread; the 250 mm stroke is the maximum standard stroke for the 63 mm bore, so no made-to-order length is involved. Remember that a plain double-rod cylinder drifts when air is lost - for a held load, pair it with a rod lock or pilot check. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt straight to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches if position feedback is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X250B FAQ
Yes - because a rod exits both covers, both strokes use the rod-side area of the 63 mm bore. Force is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, identical push and pull, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is 1/8" PT with a male rod thread on this B-coded model.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles mount on the standard ISO 21287 face. Position sensing requires the optional -S magnet code - this model has no magnet fitted, so order ACED63X250BS to use CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X250B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.