Airtac ACED Double-acting Compact Cylinder ACED63X25B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X25B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X25B
A double acting compact cylinder built to ISO 21287, the ACED63X25B pushes a 63 mm piston through a 25 mm stroke with a rod leaving BOTH covers. Because each side sees the rod-side area, output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa in either direction - there is no weaker pull stroke. The B code gives a male rod thread on both ends, and the 1/8" port serves this bore.
The through-rod resists rotation and side load and gives a symmetric mount, so the free back-end rod can carry a sensor flag or a second tooling plate. Its hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight fixtures. In practice, plan on roughly 875 N of usable work at 0.5 MPa, or match it to a part it lifts about 74 kg vertically with a 2:1 margin. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi), with a fixed TPU bumper at each end.
Airtac ACED Double-acting Compact Cylinder ACED63X25B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X25B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X25B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X25B Is Used
Symmetric CNC fixture clamping
Equal 1458.1 N clamping from either side lets one cylinder clamp a machined housing from both ends of a 25 mm stroke, with the male rod threads taking threaded clamp tips directly.
Packaging line pusher gates
The back-end rod drives a gate flag while the front rod pushes cartons, and the short ISO 21287 body fits the narrow space beside a conveyor frame where a profile cylinder will not.
Lab press and sample station
About 74 kg of vertical lift capacity at a 2:1 margin suits pressing sample trays or lids in test rigs, with the through-rod keeping the platen square under slight side load.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X25B the Right Cylinder?
At 1458.1 N per direction, this bore sits between the 50 mm size (881.2 N at 0.5 MPa) and the 80 mm size (2356.2 N at 0.5 MPa) - step down for lighter clamping, up for heavy press-fit work. The 25 mm stroke is well inside the 250 mm maximum standard stroke for bore 63, so it ships as a catalogue item. Remember that a plain double-rod cylinder drifts when air is lost; add a rod lock or pilot check if the load must stay put. Foot (LB), flange (FA/FB) and FTC brackets bolt to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches - this model has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X25B FAQ
No - the double-rod design puts a rod on both covers, so both strokes use the rod-side area and force is equal each way: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port matches the 63 mm bore.
The hard-anodized aluminium ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Sensors are not fitted as standard: order the -S code to get the optional magnet, which then allows CMSE or DMSE switches in the body slots. This ACED63X25B has no magnet, so no switch can be mounted on it as supplied.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X25B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.