Airtac ACED Double-acting Compact Cylinder ACED63X35S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X35S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X35S
A double acting compact cylinder built to ISO 21287, the ACED63X35S pushes a 63 mm piston over a 35 mm stroke with a rod leaving both covers. Because each side sees the rod-side area, output is identical in either direction: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag or a second tool plate. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clipped onto the body slots for end-of-stroke signalling.
The hard-anodized aluminium body with a roller-burnished bore pairs with an S45C hard-chrome plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke energy. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight gantries and guarding. At 0.5 MPa the 1458.1 N rating works out to roughly 148 kgf, so halving for a 2:1 margin means it lifts about 74 kg vertically. Operating range is 0.15-1.0 MPa (22-145 psi) with speeds of 30-500 mm/s.
Airtac ACED Double-acting Compact Cylinder ACED63X35S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X35S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X35S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X35S Is Used
Reciprocating transfer gantry
The through-rod drives a pick head on the front rod while the rear rod balances the moment and carries a CMSE switch flag, moving fixture plates about 74 kg equivalent vertically over the 35 mm stroke.
Press-fit of bearing bushings
Equal 1458.1 N force in both directions lets one cylinder press a bushing home on the forward stroke and eject the part on the return, with the TPU bumpers absorbing the end-of-stroke shock at 500 mm/s.
Bottling line stopper gate
The 35 mm stroke raises and lowers a gate stop in a filling machine, and the -S magnet with a DMSE switch confirms gate-up and gate-down to the PLC without external proximity sensors.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X35S the Right Cylinder?
For a 35 mm stroke doing equal work both ways, this 63 mm bore sits between the 50 mm size (881.2 N at 0.5 MPa) and the 80 mm size (2356.2 N at 0.5 MPa). If your tooling needs more than about 875 N of usable push, step up; below roughly 530 N the 50 mm saves space and air. Remember that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check valve for a held load. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt straight to the ISO 21287 face, and the -S magnet on this model lets CMSE / DMSE switches report position. Female M10x1.5 rod thread, PT ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X35S FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area of the 63 mm piston: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal push and pull. At 1.0 MPa the peak is 297.4 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, on air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow fixtures and guarding. A fixed TPU bumper at each end decelerates the piston at the ends of stroke. This ACED63X35S carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots; models ordered without the S code have no magnet. FA/FB flange, LB foot and FTC brackets plus I/Y knuckles attach to the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.