Airtac ACED Double-acting Compact Cylinder ACED80X175
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X175 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X175
A double acting compact cylinder built to ISO 21287, the ACED80X175 pushes a 20 mm rod out of BOTH covers, so thrust is identical on every stroke: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, either direction. The through-rod resists rotation and side load, and the rear rod gives you a free mounting point for a sensor flag. At 0.5 MPa the usable work force is roughly 1414 N (about 144 kg), and the rod can lift about 120 kg vertically with a 2:1 margin.
The hard-anodized aluminium body with a roller-burnished bore carries an S45C hard-chrome plated rod, and the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and gantries. Fixed TPU bumpers at both ends absorb end-of-stroke shock, air supply is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed runs 30-500 mm/s, and 1/4" ports serve this 80 mm bore. Note that position is not held if air is lost; add a rod lock or pilot check where a load must stay put.
Airtac ACED Double-acting Compact Cylinder ACED80X175 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X175 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X175
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X175 Is Used
Pneumatic press fixture
A 2356.2 N clamping or staking force at 0.5 MPa from both rod ends lets one cylinder serve two tool stations on a compact press bench, with the 175 mm stroke clearing part loading.
Reciprocating transfer slide
The through-rod resists rotation on a horizontal shuttle carrying machined housings between two CNC stations, and the rear rod can drive a flag past a position sensor when the -S magnet is ordered.
Lift-assist ejector
With about 120 kg of vertical lift capacity at a 2:1 margin, the cylinder ejects stacked pallet blanks or lowers a fixture plate in a packaging line, TPU bumpers softening both stroke ends.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X175 the Right Cylinder?
At this force class the ACED80X175 delivers 2356.2 N at 0.5 MPa in both directions thanks to the double rod. If your load is lighter, the ACED63X175 gives 1458.1 N at 0.5 MPa; if you need more, step up to the ACED100X175 at 3769.9 N. The 175 mm stroke sits well inside the 300 mm maximum standard stroke for bore 80, so no made-to-order build is needed. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, I and Y rod knuckles suit the 20 mm rod, and the optional -S magnet enables CMSE / DMSE switches; without -S no magnet is fitted. Female M12x1.25 rod thread on this code (blank), PT ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X175 FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area, so force is equal both ways: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, and the 1/4" port matches the 80 mm bore.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends; the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Sensing requires the optional -S magnet code, which allows CMSE or DMSE switches on the body slots; this ACED80X175 code has no magnet fitted. FA/FB flange, LB foot and FTC mounting bolt to the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.