Airtac ACED Double-acting Compact Cylinder ACED80X250SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X250SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 250mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke250 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X250SB
A double acting compact cylinder built to ISO 21287, the ACED80X250SB pushes a 20 mm rod out of BOTH covers, so thrust is identical on every stroke: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, either direction. The 80 mm bore runs on 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s, with a fixed TPU bumper at each end and 1/4" ports.
The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it slots into wide gantry lifts and press fixtures a full-length body cannot reach. Because the through-rod resists rotation and side load, the rear rod can carry a sensor flag while the front does the work. Plan on roughly 1414 N of usable push at 0.5 MPa, which lifts about 72 kg vertically with a 2:1 margin. The S code on this model means the magnet is fitted, so CMSE / DMSE switches mount straight on the body.
Airtac ACED Double-acting Compact Cylinder ACED80X250SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X250SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X250SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X250SB Is Used
Pallet stacker lift
The symmetric 2356.2 N thrust both ways raises and lowers a stacked pallet plate about 72 kg with margin, while the rear rod carries a DMSE switch flag for height confirmation.
Press fixture return stroke
Equal force on the return means the ejector plate pushes finished castings out of an aluminium die fixture at the same 2356.2 N as the clamping stroke.
Gantry pusher station
The short ISO 21287 body fits inside the gantry frame over a conveyor, pushing cartons across at 30-500 mm/s with the fitted magnet reporting end positions via CMSE switches.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X250SB the Right Cylinder?
At 2356.2 N per side, bore 80 sits between the 63 mm (1458.1 N at 0.5 MPa) and 100 mm (3769.9 N) classes; step down for lighter clamping, up for heavy die handling. The 250 mm stroke is inside the 300 mm standard limit for this bore, so no made-to-order build is needed. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face. Remember the piston drifts when air is lost - add a rod lock or pilot check if the load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X250SB FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so force is equal either way: 2356.2 N at 0.5 MPa, 3298.7 N at 0.7 MPa, and up to 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, -20 to +70 C.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to soften end-of-stroke contact. The S in ACED80X250SB means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped onto the body slots for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X250SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.