Airtac ACED Double-acting Compact Cylinder ACED80X275S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X275S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke275 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X275S
A double acting compact cylinder built to ISO 21287, the ACED80X275S pushes a 20 mm rod out of BOTH covers, so thrust is identical on every stroke: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal in both directions. The through-rod resists rotation and side load, and the rear rod end gives you a free mounting point for a sensor flag or a symmetric fixture. With the -S code this model carries the magnet, so CMSE / DMSE reed or solid-state switches read position directly on the body slots.
The hard-anodized aluminium body with a roller-burnished bore runs an S45C hard-chrome-plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 275 mm stroke fits deep slides and long guards without eating machine length. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s. As a rule of thumb, plan on roughly 1414 N of usable work at 0.5 MPa, which lifts about 120 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED80X275S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X275S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X275S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X275S Is Used
Pallet stacker eject
The 275 mm stroke ejects a full pallet layer from a magazine, and the equal 2356.2 N thrust both ways retracts the pusher plate against the stack without a return spring or counterweight.
Bottle line gate pusher
A through-rod on both ends lets the gate arm mount on the front rod while the rear rod carries a flag for a DMSE switch, confirming gate open and closed on a filling line.
Aluminium extrusion stop
The long 275 mm travel raises and lowers a stop on an extrusion conveyor; the through-rod resists the side load of bars bumping the stop, and the TPU bumper quiets each reversal.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X275S the Right Cylinder?
At 2356.2 N per direction this bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) sizes, so step down for lighter clamping or up for heavy press work. Remember the piston will drift if air is lost - for a held vertical load add a rod lock or pilot check valve. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the 20 mm rod. Ports are 1/4" (PT thread as coded); the max standard stroke for this bore is 300 mm, so 275 mm is a standard build.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X275S FAQ
Yes - because a rod exits both covers, both strokes use the rod-side area. Force is 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal push and pull, with a maximum of 480.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 275 mm stroke fits slides where a full-length body would not. The S in ACED80X275S means the optional -S magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clipped onto the body slots; models ordered without -S carry no magnet. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FA/FB flange, LB foot and FTC mounting bolt straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X275S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.