Airtac ACED Double-acting Compact Cylinder ACED80X300B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X300B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 300mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke300 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X300B
A double acting compact cylinder built to ISO 21287, the ACED80X300B pushes a 20 mm hard-chrome rod out of BOTH covers, so thrust is identical on the extend and return strokes. At 0.5 MPa it delivers 2356.2 N in either direction (3298.7 N at 0.7 MPa), with a fixed TPU bumper at each end to absorb end-of-stroke shock. The 300 mm stroke sits at the maximum standard stroke for the 80 mm bore, so it ships as a catalogue item, not a special.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters on long-stroke gantries and press fixtures where every millimetre of envelope counts. Because the through-rod exits the rear cover as well, the back rod can carry a sensor flag or a second tool, and the symmetric rod resists rotation and side load. The B code gives a male M12x1.75 rod thread on both ends. As a rule of thumb, plan on roughly 1414 N (about 144 kg of vertical lift) of real working force at 0.5 MPa rather than the full rating; for a 2:1 margin, keep lifted parts near 120 kg.
Airtac ACED Double-acting Compact Cylinder ACED80X300B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X300B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X300B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X300B Is Used
Press fixture ejector
The 2356.2 N bidirectional stroke ejects formed aluminium housings from a die on the forward stroke and retracts the pusher plate with equal force, all inside a frame too short for a full-length profile cylinder.
Pallet transfer pusher
Mounted with an LB foot bracket beside a pallet line, the through-rod drives a diverter in both directions at up to 500 mm/s, and the rear rod carries a flag for a proximity sensor.
Lid press on filling line
A male-threaded rod end bolts straight to a press head to seat caps on 100-120 kg containers, with the TPU bumper softening the bottom of every 300 mm stroke.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X300B the Right Cylinder?
At this force class the 80 mm bore sits between the 63 mm (1458.1 N at 0.5 MPa) and the 100 mm (3769.9 N at 0.5 MPa); step down for lighter clamping, step up when the 2356.2 N output leaves too little margin. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay put. Mount with FA/FB flanges, LB foot brackets or FTC feet plus I/Y rod knuckles on the ISO 21287 face. This unit has no magnet; if you need CMSE or DMSE switch position feedback, order the -S variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X300B FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal extending and retracting: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a peak of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy without adjustment. This model has no magnet fitted; order the -S code to enable CMSE or DMSE reed or solid-state switches along the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X300B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.