Airtac ACED Double-acting Compact Cylinder ACED80X30S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X30S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 30mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke30 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X30S
A double acting ISO 21287 compact cylinder with a piston rod leaving both covers, the ACED80X30S delivers 2356.2 N at 0.5 MPa in either direction, because both strokes work on the rod-side area of the 80 mm bore. At 0.7 MPa that rises to 3298.7 N each way, and the 20 mm through-rod resists rotation and side load while giving a symmetric mount on both faces.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and gantries. As a working figure, treat roughly 1410 N as the practical push at 0.5 MPa, which lifts about 144 kg vertically - or around 72 kg with a 2:1 margin. The S code means the magnet is fitted, so CMSE / DMSE switches can be clamped into the body slots, and a fixed TPU bumper sits at each end.
Airtac ACED Double-acting Compact Cylinder ACED80X30S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X30S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X30S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X30S Is Used
Press fixture return
The back rod pulls the tooling plate back with the same 2356.2 N that pushed it forward, so a single 30 mm stroke cycles a stamping nest in both directions at equal force.
Reciprocating slider on a packaging line
A through-rod driving a slider from both ends resists rotation and side load at 30-500 mm/s, keeping carton pushers square without external guides.
Position-flagged clamp on a robotic cell
With the -S magnet fitted, a DMSE switch on the front rod and a CMSE switch on the rear rod report both end positions of the 30 mm clamp stroke to the PLC.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X30S the Right Cylinder?
For this bore class, step down to the ACED63 at 1458.1 N @0.5 MPa if the load is lighter, or up to the ACED100 at 3769.9 N @0.5 MPa for heavier tooling. The 30 mm stroke sits well inside the 300 mm maximum standard stroke for bore 80. Remember the piston drifts if air is lost - add a rod lock or pilot check where a load must stay put. FA/FB flange, LB foot and FTC brackets bolt to the ISO 21287 face, and the female M12x1.75 rod thread takes standard rod knuckles (I or Y).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X30S FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so force is equal each way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FA/FB flange, LB foot and FTC brackets fitting the standard face. The S in the model code means the optional -S magnet is fitted, so CMSE / DMSE switches can be mounted in the body slots. A fixed TPU bumper at each end absorbs end-of-stroke energy; it does not hold or brake a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.