Airtac ACED Double-acting Compact Cylinder ACED80X35
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X35 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X35
A double acting compact cylinder built to ISO 21287, the ACED80X35 pushes a 20 mm rod out of BOTH covers, so its 80 mm bore delivers 2356.2 N at 0.5 MPa in either direction - both strokes work on the rod-side area, giving 3298.7 N at 0.7 MPa. The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into press fixtures and gantries where a full-length body will not fit.
The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag on a pick-and-place arm. With 2356.2 N available, plan on roughly 1414 N of real work at 0.5 MPa, which lifts about 72 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the S45C hard-chrome-plated rod runs at 30-500 mm/s on air filtered to 40 um.
Airtac ACED Double-acting Compact Cylinder ACED80X35 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X35 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X35
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X35 Is Used
Press-head return balancing
The rear rod pulls with the same 2356.2 N the front rod pushes, so a stamping press head can be driven and counterbalanced by one cylinder instead of two.
Fixture clamping in tight cells
The short ISO 21287 body frees about half the mounting length of an ISO 15552 profile cylinder, letting the 80 mm bore clamp jigs inside a guarded CNC cell.
Two-sided gate actuation
A rod on each cover lets a packaging line gate be pushed and pulled from a single 1/4" ported cylinder, with the back rod carrying a position flag.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X35 the Right Cylinder?
At 2356.2 N per direction this bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) double-rod sizes - step down to 63 for lighter clamping, up to 100 when the load climbs. The 35 mm stroke is well inside the 300 mm maximum standard stroke for bore 80. Note that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check if the load must stay put. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face; the female M12x1.75 rod thread suits standard rod accessories. Order the -S code if you want the optional magnet for CMSE / DMSE switches - without it no sensor can be read.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X35 FAQ
Yes - it is a double-rod cylinder, so both strokes use the rod-side area of the 80 mm bore. Output is 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal in each direction, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C on air filtered to 40 um.
It is an ISO 21287 compact body in hard-anodized aluminium with an S45C hard-chrome rod and a fixed TPU bumper at each end, about 50% shorter in mounting length than an ISO 15552 profile cylinder. Sensors are possible only with the optional -S magnet code, which enables CMSE / DMSE switches; the base ACED80X35 has no magnet. Mounting: FA/FB flange, LB foot, FTC, plus I/Y rod knuckles on the M12x1.75 female rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.