Airtac ACED Double-acting Compact Cylinder ACED80X35B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X35B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X35B
A double acting compact cylinder built to ISO 21287, the ACED80X35B pushes a 20 mm rod out of BOTH covers, so thrust is identical on every stroke: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, either direction. The male rod thread (B code) bolts straight to tooling, and the through-rod resists rotation and side load while the free back-end rod can carry a sensor flag or a second fixture point.
The hard-anodized aluminium body with an S45C hard-chrome plated rod runs 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), with a fixed TPU bumper at each end. Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 80 mm bore fits tight press fixtures and gantries. At 0.5 MPa the practical working figure is roughly 1414 N of real work, and it lifts about 120 kg vertically with a 2:1 margin. FA/FB flanges, LB feet and FTC brackets mount on the standard ISO 21287 face; add the optional -S magnet if CMSE / DMSE switching is needed.
Airtac ACED Double-acting Compact Cylinder ACED80X35B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X35B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X35B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X35B Is Used
Pneumatic press fixture
2356.2 N at 0.5 MPa both ways suits a short-stroke stamping or riveting head on a jig line, where the compact body fits under a low press frame.
Reciprocating transfer arm
The through-rod gives a symmetric mount and resists rotation, ideal for a 35 mm shuttle stroke moving aluminium castings between two machining stations.
Vertical lift assist
With about 120 kg of vertical lift capacity at a 2:1 margin, the back-end rod can counterbalance a pallet clamp head on a packaging gantry.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X35B the Right Cylinder?
This 80 mm bore sits in the heavy end of the ACED range: step down to a 63 mm bore (1458.1 N at 0.5 MPa) for lighter clamping, or up to 100 mm (3769.9 N) where the load demands more. The 35 mm stroke is well inside the 300 mm maximum standard stroke for this bore, so it ships as a standard build. Remember the piston drifts when air is lost - for a held load pair it with a rod lock or pilot check. The B code gives a male rod thread on a PT port thread; order the -S suffix only if you need the magnet for CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X35B FAQ
Because a rod exits both covers, force is equal in both directions: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa on every stroke (rod-side area). At the full 1.0 MPa rating the cylinder reaches 480.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flange, LB foot or FTC brackets bolt to the standard face. A fixed TPU bumper at each end absorbs end-of-stroke energy but never locks or holds a load - use a rod lock or pilot check where position must be kept. The optional -S magnet enables CMSE / DMSE switches; without it no sensing is possible.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X35B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.