Airtac ACED Double-acting Compact Cylinder ACED80X35SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X35SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X35SB
A double acting AirTAC ACED80X35SB with an 80 mm bore and 35 mm stroke pushes a piston rod out of BOTH covers, so the force is identical in each direction: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, either way. The hard-anodized aluminium body is an ISO 21287 compact build, roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, which is why it slots into dense palletizing frames and press fixtures a full-length body cannot reach. The B code gives a male rod thread on each end, and the S code fits the magnet so CMSE / DMSE switches can be clipped onto the body slots.
Because the rod-side area drives both strokes, you can plan real work at about 1414 N (roughly 0.6 of the 0.5 MPa rating) and expect about 120 kg of vertical lift with a 2:1 margin. A fixed TPU bumper at each cover absorbs end-of-stroke shock, the 20 mm hard-chrome S45C through-rod shrugs off side load and resists rotation, and speed runs 30-500 mm/s across 0.15-1.0 MPa (22-145 psi) of clean, 40 um filtered air.
Airtac ACED Double-acting Compact Cylinder ACED80X35SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X35SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X35SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X35SB Is Used
Palletizing pusher gates
The 2356.2 N bidirectional stroke rejects or diverts pallets on a conveyor line, and the through-rod keeps the push plate square under offset loads.
Press-fit stamping fixture
With 3298.7 N at 0.7 MPa in both directions, the ACED80X35SB seats bearings or bushings in an automotive assembly jig where body length is limited.
Indexing table with position feedback
The fitted magnet drives CMSE / DMSE switches at both ends of the 35 mm stroke, confirming full advance and retract on a packaging rotary indexer.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X35SB the Right Cylinder?
At 80 mm bore this is a mid-heavy class unit: 2356.2 N per direction at 0.5 MPa, up to 480.5 kgf at 1.0 MPa. If your load sits under 881.2 N, the ACED50 at 0.5 MPa saves space and air; if you need more than 2356.2 N, step up to the ACED100 for 3769.9 N. Remember the piston will drift if air is lost, so add a rod lock or pilot check valve for a held load. FA/FB flanges, LB feet and FTC brackets bolt to the standard face, and I/Y rod knuckles suit the male threads. The 35 mm stroke is well inside the 300 mm standard range for this bore.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X35SB FAQ
Yes, identical both ways because a rod exits each cover and both strokes use the rod-side area: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a peak of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C on air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow machine frames, and FA/FB flange, LB foot or FTC brackets bolt straight to the standard face. The S in ACED80X35SB means the optional -S magnet is fitted, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots for end-of-stroke signalling. A fixed TPU bumper at each end tapers the stop, and the male rod thread on both ends accepts I or Y knuckles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X35SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.