Airtac ACED Double-acting Compact Cylinder ACED80X45S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X45S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 45mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke45 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X45S
A double acting compact cylinder with a rod leaving both covers, the ACED80X45S delivers 2356.2 N in each direction at 0.5 MPa, because both strokes work on the rod-side area of the 80 mm bore. At 0.7 MPa that rises to 3298.7 N, and the peak rating is 480.5 kgf at 1.0 MPa. The 45 mm stroke suits short clamp-and-return motions inside tight machine frames.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into gantries and guarding where a full-length body will not reach. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag. This -S model carries the optional magnet, so CMSE / DMSE switches mount directly on the body slots. A rule of thumb for real work: plan on roughly 1414 N at 0.5 MPa, which lifts about 72 kg vertically with a 2:1 margin. Body is hard-anodized aluminium, rod is S45C with hard chrome, and a fixed TPU bumper sits at each end.
Airtac ACED Double-acting Compact Cylinder ACED80X45S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X45S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X45S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X45S Is Used
CNC fixture clamping
The 2356.2 N symmetric force clamps aluminium housings in machining fixtures, and the 45 mm stroke clears the loader arm quickly at up to 500 mm/s.
Packaging pusher stations
A rod on each side lets the rear rod carry a sensor flag while the front rod pushes cartons off a conveyor, with CMSE switches confirming each stroke.
Press-fit assist ram
Roughly 72 kg of safe vertical lift at 0.5 MPa assists light press-fit assembly of bearings and bushings inside compact machine guards.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X45S the Right Cylinder?
For lighter clamping, the 63 mm bore gives 1458.1 N at 0.5 MPa; for heavier press-fit work step up to the 100 mm bore at 3769.9 N. Remember this cylinder does not hold position if air is lost - the piston will drift, so add a rod lock or pilot check for held loads. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the 20 mm rod. The -S magnet in this model pairs with CMSE / DMSE switches for end-of-stroke signalling. Ports are 1/4" PT, female rod thread M12x1.75.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X45S FAQ
Yes - the double rod means both strokes use the rod-side area, so output is equal in each direction: 2356.2 N at 0.5 MPa, 3298.7 N at 0.7 MPa, and up to 480.5 kgf at the 1.0 MPa maximum. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, freeing space in guarded gantries. The -S code on this model means the magnet is fitted, so CMSE / DMSE reed or solid-state switches clip into the body slots for position feedback. FA/FB flanges, LB feet and FTC brackets mount on the standard face, and a fixed TPU bumper decelerates the piston at each end of the 45 mm stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X45S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.