Airtac ACED Double-acting Compact Cylinder ACED80X50SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X50SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 50mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke50 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X50SB
A double acting ISO 21287 compact cylinder with a through rod, the ACED80X50SB pushes a rod out of both covers, so the 80 mm bore delivers the same 2356.2 N at 0.5 MPa (3298.7 N at 0.7 MPa) on every stroke. The male rod thread on each 20 mm end suits external tooling, and the fixed TPU bumper at both ends absorbs end-of-stroke shock. Air supply is 0.15-1.0 MPa (22-145 psi) with speed from 30-500 mm/s.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and gantries. Because the piston drifts when air is lost, pair it with a rod lock or pilot check for held loads. At 0.5 MPa plan on roughly 1414 N of usable work, which is about 120 kg lifted vertically with a 2:1 margin. The fitted -S magnet accepts CMSE / DMSE switches for end-position sensing.
Airtac ACED Double-acting Compact Cylinder ACED80X50SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X50SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X50SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X50SB Is Used
Pneumatic press fixture
The 2356.2 N of equal force in both directions suits a short-stroke stamping or riveting head on an assembly line, where the 50 mm stroke matches a quick clinch cycle and the through rod keeps the tooling square.
Gantry lift-and-lower station
With about 120 kg liftable vertically at a 2:1 margin, the double rod carries a counterbalanced pallet elevator carriage between two stops, with CMSE switches reporting top and bottom via the fitted magnet.
Reciprocating transfer slide
On a packaging machine shuttle that must index a carton forward and retract with identical thrust, the symmetric rod-side output and 30-500 mm/s speed range keep the cycle balanced at both ends.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X50SB the Right Cylinder?
At 2356.2 N per direction, this 80 mm double-rod unit sits between the 63 mm bore (1458.1 N) and the 100 mm bore (3769.9 N) at 0.5 MPa, so pick it when a 63 mm frame runs out of force but a 100 mm body will not fit the envelope. The 50 mm stroke is well inside the 300 mm maximum standard stroke for this bore. Choose the male-threaded B rod end when the load bolts to a nut rather than screwing onto the rod, and add FA flange or LB foot brackets on the ISO 21287 face. If the application must hold position on air loss, specify a separate rod lock cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X50SB FAQ
The 80 mm double-rod bore gives 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, identical on both strokes because a rod exits each cover and both sides use the rod-side area. At 1.0 MPa the rating is 480.5 kgf. As a working guide, treat about 1414 N as usable at 0.5 MPa, roughly a 120 kg vertical lift with a 2:1 margin. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, with a 1/4" PT port and a 20 mm male-threaded rod.
The hard-anodized aluminium ISO 21287 body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it fits shallow machine frames, and FA/FB flange, LB foot or FTC brackets bolt straight to the standard face. A fixed TPU bumper at each end absorbs end-of-stroke impact. This version carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches can be clipped into the body slots for position feedback; without the -S code there is no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X50SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.