Airtac ACED Double-acting Compact Cylinder ACED80X5B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X5B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 5mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke5 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X5B
A double acting compact cylinder built to ISO 21287, the ACED80X5B pushes a 20 mm hard-chrome rod out of BOTH covers, so the 80 mm bore delivers an identical 2356.2 N at 0.5 MPa in each direction - both strokes work on the rod-side area. At 0.7 MPa that rises to 3298.7 N either way, with a peak of 480.5 kgf at 1.0 MPa. The 5 mm stroke suits short clamping and positioning moves where a long body would never fit.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight guarding and fixture plates. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag or a second tool. Air is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and fixed TPU bumpers absorb the stroke ends. For vertical work, plan on roughly 144 kg of usable thrust (about 0.6 of the 0.5 MPa force), or lift about 120 kg with a 2:1 margin. Note: with no -S code there is no magnet, so CMSE / DMSE switches cannot be read - order ACED80X5BS if position sensing is needed.
Airtac ACED Double-acting Compact Cylinder ACED80X5B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X5B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X5B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X5B Is Used
Short-stroke press clamping
A 5 mm stroke with 2356.2 N both ways is ideal for a punch-clamp on an aluminium extrusion line, where the through-rod keeps the clamp shoe from twisting under offset load.
Fixture plate part ejector
On a CNC machining fixture, the rear rod of the ACED80X5B can push a part-stop flag while the front rod ejects the finished workpiece - one cylinder, two synchronized faces.
Compact lift-assist module
In a packaging machine guard with limited depth, the short ISO 21287 body lifts about 120 kg vertically with a 2:1 margin, guided by the 20 mm rod at both ends.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X5B the Right Cylinder?
At 2356.2 N per direction this bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) ACED sizes - step down for lighter clamps, up for heavy presses. The 5 mm stroke is well inside the 300 mm standard range for bore 80, so it ships as a catalog item. The B code gives a male M12x1.75 rod thread; PT is the port thread. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X5B FAQ
Because a rod exits both covers, force is equal in both directions: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, on the rod-side area for both strokes. Maximum output is 480.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and a fixed TPU bumper at each end of the 5 mm stroke.
The hard-anodized aluminium ISO 21287 body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it fits shallow machine frames. The B code supplies a male M12x1.75 rod thread on both ends, ready for I or Y knuckles, and FA/FB flange or LB foot brackets mount on the standard face. The optional -S magnet enables CMSE / DMSE switches; this model without S has no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X5B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.