Airtac ACED Double-acting Compact Cylinder ACED80X75
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X75 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X75
A double acting compact cylinder built to ISO 21287, the ACED80X75 pushes a 20 mm rod out of BOTH covers, so its 80 mm bore delivers 2356.2 N at 0.5 MPa in either direction - both strokes work on the rod-side area, with 3298.7 N available at 0.7 MPa. The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, which is why it fits tight press fixtures and gantry frames a full-length body cannot.
The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag or a second tooling plate. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the S45C hard-chrome-plated rod runs in a roller-burnished bore for long seal life. For sizing: plan on roughly 1414 N of usable work at 0.5 MPa, which lifts about 120 kg vertically with a 2:1 margin. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED80X75 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X75 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X75
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X75 Is Used
Press-fit bushings in gearbox housings
The 2356.2 N symmetric thrust at 0.5 MPa seats automotive bushings from either side, and the short ISO 21287 body slots into a crowded transfer line where a profile cylinder is too long.
Counterbalanced lift of weld fixtures
A rod on each cover lets the ACED80X75 raise and lower a 120 kg fixture with equal force both ways, while the through-rod keeps the tooling plate from rotating.
Reciprocating pusher on a bottling conveyor
The rear rod drives a position flag for CMSE / DMSE switches (with the optional -S magnet), and the fixed TPU bumpers tame the 30-500 mm/s stroke ends without extra hardware.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X75 the Right Cylinder?
At 2356.2 N per side at 0.5 MPa, the 80 mm bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) options - step down for lighter clamping, up for heavy lift-and-press work. The 75 mm stroke is well inside the 300 mm standard limit for this bore. Remember the piston drifts if air is lost: add a rod lock or pilot check valve where a load must stay put. Mount with FA/FB flanges, LB feet or FTC brackets plus I/Y rod knuckles, and order the optional -S code if you need CMSE / DMSE switch sensing - without -S there is no magnet in the piston.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X75 FAQ
Yes - the double-rod design puts a 20 mm rod through both covers, so every stroke uses the rod-side area. Output is 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal push and pull, with a maximum of 480.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) and proof pressure is 1.5 MPa (215 psi).
Port size for bore 80 is 1/4" (PT thread standard, G available), with a female M12x1.75 rod thread. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face. Position sensing needs the optional -S magnet code, which enables CMSE / DMSE switches; the standard ACED80X75 has no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.