Airtac ACED Double-acting Compact Cylinder ACED80X75SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X75SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X75SB
A double acting compact cylinder built to ISO 21287, the ACED80X75SB pushes a 20 mm hard-chrome rod out of BOTH covers, so the 80 mm bore delivers the same 2356.2 N at 0.5 MPa (3298.7 N at 0.7 MPa) on every stroke - no push/pull imbalance to design around. The male rod thread (B code) suits external nuts and knuckles, and the fixed TPU bumper at each end absorbs end-of-stroke shock at speeds up to 500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight press fixtures and sliding gantries. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag. Because the -S magnet is fitted, CMSE / DMSE switches mount directly in the body slots. Practical sizing: keep real work near 1414 N (about 0.6 of rating) and expect roughly 120 kg of vertical lift at a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED80X75SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X75SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X75SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X75SB Is Used
Symmetric press fixture
The equal 2356.2 N output in both directions lets one ACED80X75SB press a bearing in on the forward stroke and eject the part on the return, with the male rod thread taking a standard press ram.
Gantry Z-axis lift
A through-rod on both ends balances the load and resists rotation when raising a 120 kg pallet clamp vertically, while the fitted magnet feeds CMSE switch signals for top and bottom positions.
Bidirectional pusher station
On a bottling line diverter, the same rod-side force pushes cases left or right from either cover, and the compact body fits the 75 mm envelope beside the conveyor frame.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X75SB the Right Cylinder?
At 2356.2 N per direction, the 80 mm bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) options - step down for lighter clamping, up for heavy lift-and-press work. The 75 mm stroke is well inside the 300 mm standard limit for this bore, so it ships as a catalogue item. Remember that a plain double-rod cylinder drifts when air is lost; add a rod lock or pilot check for held loads. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and PT ports take standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X75SB FAQ
Because a rod exits both covers, both strokes use the rod-side area: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal in extend and retract. At 1.0 MPa the bore reaches a maximum of 480.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium barrel and fixed TPU bumpers at both ends. This model carries the optional -S magnet, so CMSE / DMSE switches can be slid into the body slots for position feedback. FA/FB flanges, LB feet and FTC brackets mount on the standard face; outline dimensions: confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X75SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.