Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10
A double acting ISO 21287 compact cylinder, the ACEJ32X10-10 pairs a 32 mm bore with a 10 mm stroke and an external stop screw that trims the extend stroke anywhere in the 0-10 mm range. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N, with a theoretical ceiling of 82 kgf at 1.0 MPa. The hard-anodized aluminium body and hard-chrome S45C rod shrug off wear in high-cycle machines.
Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into cramped fixtures where a full-length body will not reach. Plan on roughly 241 N of usable push at 0.5 MPa, which lifts about 20 kg vertically with a 2:1 margin - enough to index a small pallet or clamp a light die. A fixed TPU bumper at each end absorbs end-of-stroke shock, and FA flange or LB foot mounts bolt straight to the ISO 21287 face.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10 Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10 Is Used
Light press-fit clamping
Trims a 10 mm extend stroke to seat small bearings or bushings in electronics assembly fixtures, using about 241 N of usable push at 0.5 MPa.
Short-stroke part indexing
The 0-10 mm adjustable window stops parts precisely at a packaging line gate, with the TPU bumper softening every cycle at 30-500 mm/s.
Compact fixture ejection
Ejects finished CNC-machined caps from a tight jig where the short body, about 50% shorter than an ISO 15552 profile cylinder, is the only fit.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10 the Right Cylinder?
At 402.1 N push at 0.5 MPa, this 32 mm bore sits between the 25 mm bore (245.4 N) for lighter clamping and the 40 mm bore (628.3 N) when you need more margin on the same footprint. The -10 window suits very short indexing moves where the stop screw sets the exact extend position on site. Remember the adjuster is a mechanical end stop only: on air loss the piston still drifts, so add a valve or external stop if the load must stay put. FA flange and LB foot mountings fit standard ISO 21287 fixtures, and the rod end here is female M8x1.25 with a PT port thread. If you need position feedback, order the -S variant - without it no magnet is fitted and no CMSE or DMSE switch can be read.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10 FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push is 563 N and pull 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the extend stroke is trimmed by the stop screw anywhere in the 0-10 mm window.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, a hard-chrome S45C rod and a fixed TPU bumper at both ends - roughly 50% shorter in mounting length than an ISO 15552 profile cylinder. It mounts via FA flange or LB foot. Sensors work only if you order the optional -S magnet code; this model has no magnet, so CMSE or DMSE switches cannot be fitted unless -S is specified.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.