Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B
A double acting ISO 21287 compact cylinder, the ACEJ32X10-10B pairs a 32 mm bore with a 10 mm stroke and a male rod thread (the B code). At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and fixtures. The -10 code gives a 10 mm adjustment window: an external stop screw trims the extend stroke anywhere from 0 to 10 mm on site. As a working rule, plan on roughly 240 N (about 24 kg equivalent) of usable push at 0.5 MPa, which lifts about 24 kg vertically - halve that for a 2:1 margin on a real part. Note this unit has no magnet fitted; order the -S code if you need CMSE / DMSE switch sensing.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B Is Used
Short-throw press fitting
The 402.1 N push at 0.5 MPa (563 N at 0.7 MPa) presses bearings or dowels into small housings, with the 0-10 mm trimmed stroke setting the exact seating depth on the fixture.
Machine tool tooling clamp
Clamps a collet or workpiece on a CNC fixture where the compact body fits inside the guard and the stop screw locks in the clamping position without shims.
Ejector on an assembly station
Ejects finished parts from a nest on a rotary indexing table; the 10 mm stroke clears the part while the short ISO 21287 body keeps the station footprint small.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B the Right Cylinder?
At 402.1 N push at 0.5 MPa, the 32 mm bore sits between the 25 mm (245.4 N) and 40 mm (628.3 N) sizes - step down for lighter clamping, up if your load needs more margin. The 0-10 mm adjustable extend range suits short-throw positioning where the exact stop point is set during commissioning. The stop screw is a mechanical end stop, not a mid-stroke lock, so the rod can still drift if air is lost. FA flange or LB foot mounting bolts to the ISO 21287 face; PT ports as standard (G on request). If position feedback matters, specify the -S magnet version for CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B FAQ
Bore 32 mm, stroke 10 mm adjustable from 0 to 10 mm via the external stop screw. Push is 402.1 N and pull 345.6 N at 0.5 MPa; push 563 N and pull 483.8 N at 0.7 MPa; theoretical maximum 82 kgf at 1.0 MPa. It is double acting, runs 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, with a 1/8" PT port and a 12 mm male-thread rod (B code).
An external stop screw shortens the extend stroke within the ordered -10 window, so you can set any extend position from 0 to 10 mm during setup; the fixed TPU bumper at each end absorbs end-of-stroke energy but never holds or brakes a load. This unit ships without a magnet - the optional -S code adds one so CMSE / DMSE switches can be mounted on the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.