Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB
The ACEJ32X10-10SB is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 10 mm stroke anywhere within the ordered -10 window, giving a usable range of 0-10 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, and the male-threaded 12 mm rod (the B code) bolts straight into standard tooling. The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures a full-length body cannot reach.
For sizing the load, plan on roughly 240 N of real work at 0.5 MPa (about 60% of the push rating), which corresponds to lifting about 24 kg vertically - or about 12 kg with a 2:1 margin. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots for end-of-stroke sensing. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the 1/8" port, PT thread and FA/LB mounting options keep integration simple.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB Is Used
Short-throw clamping on CNC fixtures
The 0-10 mm adjustable range is ideal for clamp-and-hold steps on machining fixtures where the clamp point is set on site and the compact body must fit between jaws.
Eject or kick-off in small assembly stations
402.1 N at 0.5 MPa is enough to push small parts off a nest or chute; the male rod thread makes attaching a custom kicker plate straightforward.
Position-verified press-fit check
With the fitted -S magnet and a CMSE switch, the controller confirms the rod reached the trimmed stop before the next station indexes.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB the Right Cylinder?
At 402.1 N push at 0.5 MPa, the 32 mm bore sits between the 25 mm (245.4 N) and 40 mm (628.3 N) sizes - step down for lighter clamping, up if your load needs more margin. The -10 window only shortens the extend stroke on site; it is a mechanical end stop, not a mid-stroke lock, so the rod can still drift on air loss. If you need position feedback, this -S version already carries the magnet for CMSE / DMSE switches; FA flange or LB foot mounts bolt to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB FAQ
Push is 402.1 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa push rises to 563 N, and the theoretical maximum is 82 kgf at 1.0 MPa. It is double acting with an adjustable extend stroke (0-10 mm via the -10 stop screw), runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, with a 1/8" PT port and a 12 mm male-threaded rod.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. FA flange and LB foot brackets bolt to the standard face, and a fixed TPU bumper at each end absorbs end-of-stroke energy. The -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots for stroke-end detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X10-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.