Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100
The ACEJ32X100-100 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 100 mm stroke anywhere within the ordered -100 window, so one cylinder covers a 0-100 mm working range. At 0.5 MPa the 32 mm bore delivers 402.1 N push and 345.6 N pull, rising to 563 N push at 0.7 MPa. In practice, plan on roughly 241 N (about 24 kgf) of usable work at 0.5 MPa, which corresponds to lifting around 20 kg vertically with a 2:1 margin.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guarding and gantry frames. A hard-anodized aluminium body carries a hard-chrome plated S45C rod, fixed TPU bumpers absorb end-of-stroke shock at both ends, and FA flange or LB foot mounts bolt straight to the standard face. Note this model has no magnet fitted; order the optional -S code if you need CMSE / DMSE switch position sensing.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100 Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100 Is Used
Modular jig clamping
Trims its 100 mm extend stroke on site to clamp fixture plates of varying heights in a machining cell, with about 241 N of usable holding force at 0.5 MPa.
Packaging pusher station
Ejects cartons or trays from a conveyor lane; the 0-100 mm adjustable window lets one cylinder serve several product widths without re-plumbing.
Small-parts press fit
Presses bushings or dowels into housings on an assembly bench, using the 563 N push at 0.7 MPa for light interference fits.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100 the Right Cylinder?
Size by force: if 402.1 N push at 0.5 MPa is marginal for your load, step up to the 40 mm bore (628.3 N push at 0.5 MPa); for lighter clamping the 25 mm bore gives 245.4 N at the same pressure. Both neighbours share the same mounting family, so re-fixturing is minimal. Remember the stop screw is a mechanical end stop for the extend stroke only - on air loss the piston still drifts, so it is not a mid-stroke lock or load brake. This version has a female M8x1.25 rod thread and PT ports; add B for a male thread and -S if CMSE / DMSE sensing will be needed later.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100 FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push is 563 N and pull 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 100 mm extend stroke by up to 100 mm, giving a usable range of 0-100 mm. It runs double acting on 0.15-1.0 MPa (22-145 psi) air at 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA flange or LB foot mounts bolt directly to its standard face. Position sensing requires the optional -S magnet code - this model has no magnet, so CMSE / DMSE switches cannot be fitted unless -S is ordered. Fixed TPU bumpers at both ends absorb end-of-stroke shock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X100-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.