Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10
The ACEJ32X110-10 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 110 mm stroke by up to 10 mm on site, giving a usable range of 100-110 mm without changing the cylinder. At 0.5 MPa the 32 mm bore delivers 402.1 N push and 345.6 N pull, rising to 563 N push at 0.7 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit.
For sizing, plan on roughly 240 N of real work at 0.5 MPa (about 60% of the push rating), which corresponds to lifting about 24 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries a 12 mm S45C hard-chrome rod with a female M8x1.25 thread, and air ports are 1/8" PT. A fixed TPU bumper at each end absorbs end-of-stroke impact. Note that the stop screw is a mechanical end stop only - on air loss the piston can still drift, so it is not a load-holding lock.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10 Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10 Is Used
Fixture clamping on CNC machining centers
The 402.1 N push at 0.5 MPa clamps aluminum housings in drill and mill jigs, and the 10 mm stop screw lets the setter dial in the exact clamp position per fixture.
Packaging line push-off stations
With a 100-110 mm adjustable extend range and 30-500 mm/s speed, the cylinder nudges cartons off a conveyor into a checkweigher lane; the compact body fits under low guarding.
Sample press in laboratory automation
The 24 kg vertical-lift equivalent and female M8x1.25 rod thread suit a small capping or pressing head on an analytical sample-prep module.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10 the Right Cylinder?
At 402.1 N push (0.5 MPa) this bore covers clamping, pressing and transfer tasks in the light-to-medium class. Step down to the 25 mm bore (245.4 N push) for lighter fixtures, or up to the 40 mm bore (628.3 N push) when the load grows. The 10 mm adjustment window suits fine end-position tuning on the extend side only; it cannot extend the stroke past 110 mm. Bolt on FA flange or LB foot brackets to the ISO 21287 face, and if you need position sensing, order the -S variant so CMSE / DMSE switches can be used - this code has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10 FAQ
Push is 402.1 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa push rises to 563 N and pull to 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The 32 mm bore has a 12 mm rod with female M8x1.25 thread, 1/8" PT ports, operating pressure 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and a temperature range of -20 to +70 C on air filtered to 40 um.
The -10 code is a 10 mm adjustment window: an external stop screw shortens the 110 mm extend stroke on site, so the effective range is 100-110 mm. It is a mechanical end stop, not a mid-stroke lock - the piston can still drift if air is lost. Fixed TPU bumpers at both ends absorb end-of-stroke energy, FA flange and LB foot brackets mount to the ISO 21287 face, and the body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Position sensing requires the optional -S magnet code with CMSE / DMSE switches; this model has no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.