Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100
The ACEJ32X110-100 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 110 mm stroke by up to 100 mm on site, giving a usable range of 10-110 mm without changing the cylinder. At 0.5 MPa the 32 mm bore delivers 402.1 N push and 345.6 N pull, rising to 563 N push at 0.7 MPa, with a theoretical peak of 82 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames and guarding where a full-length body will not fit. In practice, plan on roughly 240 N of real work at 0.5 MPa (about 0.6 of the push rating), which corresponds to lifting around 12 kg vertically - halve that for a 2:1 margin and it comfortably handles an 6 kg part. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the hard-anodized aluminium body with an S45C hard-chrome plated 12 mm rod stands up to continuous cycling.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100 Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100 Is Used
Fixture clamp tuning
On a CNC machining fixture, the 10-110 mm adjustable range lets the setter dial in exact clamp travel per part family, with 402.1 N push at 0.5 MPa holding steel workpieces firmly.
Packaging line stopper
As a product stopper on a bottling conveyor, the compact body fits under low guard rails, and the stop screw allows stroke trimming when bottle pitch changes.
Small-parts ejector
Ejecting stamped brackets from a die, the 345.6 N pull at 0.5 MPa retracts reliably while the TPU bumpers quiet the return stroke at 30-500 mm/s.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100 the Right Cylinder?
At 402.1 N push at 0.5 MPa this 32 mm bore suits clamping and positioning loads in the 20-25 kg class; step down to the 25 mm bore (245.4 N push) for lighter fixtures, or up to the 40 mm bore (628.3 N push) if the load may grow. The -100 window means one cylinder covers strokes from 10 to 110 mm, ideal when the final stroke is tuned during commissioning. Note that the stop screw is a mechanical end stop only - on air loss the piston drifts, so add a separate valve or lock if the load must be held. Mounting: FA flange or LB foot bolt to the ISO 21287 face, with I/Y rod knuckles on the M8x1.25 female thread. The magnet is not fitted on this code; order the -S variant if CMSE / DMSE switches are needed later.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100 FAQ
Push is 402.1 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa push reaches 563 N and pull 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It is double acting with an adjustable extend stroke: the stop screw shortens the 110 mm stroke by up to 100 mm (usable 10-110 mm). Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um, port 1/8" PT, rod thread M8x1.25 female.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA flange or LB foot mounts bolt straight to the standard face. Sensing requires the optional -S magnet code - this model (no S) has no magnet, so CMSE / DMSE switches cannot be mounted until you order the -S version. A fixed TPU bumper at each end absorbs end-of-stroke energy; it is not a mid-stroke lock and will not hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.