Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB
The ACEJ32X110-100SB is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. A stop screw on the outside of the body trims the 110 mm stroke down by up to 100 mm, giving a usable extend range of 10-110 mm without changing the order code. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, and the male rod thread (B code) bolts straight into tooling plates.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight guarding and slide fixtures. Because the S magnet is fitted, CMSE or DMSE reed and solid-state switches can be clamped anywhere along the body to flag end positions. For sizing, treat roughly 241 N (about 60% of the push force) as the practical working output, which is the equivalent of lifting about 20 kg vertically with a 2:1 margin.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB Is Used
Fixture clamp tuning
On an aluminium machining fixture, the stop screw lets one cylinder serve parts of different heights: set the extend stroke anywhere from 10 to 110 mm during changeover instead of swapping cylinders.
Small press station
A bench-top marking or staking station gets 402.1 N of push at 0.5 MPa (563 N at 0.7 MPa), enough for light forming on brackets, with the compact body fitting inside the press frame.
Packaging line stopper
As a product stop or pusher on a food-packaging conveyor, the fitted magnet and a DMSE switch confirm the stop is up before the next carton is released.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB the Right Cylinder?
At 32 mm bore this unit sits between the 25 mm size (245.4 N push at 0.5 MPa) and the 40 mm size (628.3 N push at 0.5 MPa), so pick 32 mm when a slide or gripper needs roughly 400 N. If the machine later needs more force, step up to 40 mm rather than raising pressure. The -100 window suits jobs where the final stop position is tuned on commissioning, for example clamping different part heights on one fixture. Remember the stop screw is a mechanical end stop only: on air loss the rod can still drift, so it is not a load-holding lock. FA flange or LB foot mounts and I/Y rod knuckles fit the ISO 21287 face, and the fitted magnet lets CMSE / DMSE switches report position. Port is 1/8" (PT), rod thread is male, operating pressure 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push rises to 563 N and pull to 483.8 N. Theoretical maximum is 82 kgf at 1.0 MPa. The ordered stroke is 110 mm and the -100 stop screw trims the extend stroke by up to 100 mm, so the usable extend range is 10-110 mm. Port is 1/8" PT, rod is 12 mm with a male thread, and speed runs 30-500 mm/s.
The ISO 21287 body is hard-anodized aluminium with an S45C hard-chrome-plated rod, and it saves about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper at each end absorbs end-of-stroke impact. Mount via FA flange or LB foot on the standard ISO 21287 face, and because the -S magnet is fitted on this model, CMSE or DMSE switches can be fitted along the body slots for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-100SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.