Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B
The ACEJ32X110-10B is a double acting AirTAC compact cylinder built to ISO 21287, with a 32 mm bore, a 110 mm stroke and a male rod thread on the 12 mm rod. An external stop screw trims the extend stroke anywhere within the ordered 10 mm window, so the usable extend range is 100-110 mm, set on site with a screwdriver. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into cramped fixtures and machine frames. As a working rule, plan on roughly 241 N of real work at 0.5 MPa (about 0.6 of the push force), which corresponds to lifting about 20 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries a hard-chrome plated S45C rod, fixed TPU bumpers sit at both ends, and the rod speed runs 30-500 mm/s.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B Is Used
Fixture clamping on CNC machining centers
Clamps aluminum housings in dedicated jigs where the 402.1 N push at 0.5 MPa is ample and the 100-110 mm adjustable extend range lets one fixture serve two part lengths.
Small assembly press stations
Presses bearings or dowels into plastic housings on a benchtop station; the short body fits under a low gantry and the male rod thread takes a custom press tip directly.
Indexing pusher on packaging lines
Pushes cartons between lanes at 30-500 mm/s; the 110 mm stroke trims to 100 mm via the stop screw to match lane pitch without changing hardware.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B the Right Cylinder?
Size this bore when your load needs roughly 240-400 N at 0.5 MPa. A 25 mm bore delivers 245.4 N push at 0.5 MPa for lighter clamping, while a 40 mm bore gives 628.3 N for heavier presses. Note that the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it is not a mid-stroke lock. FA flange or LB foot mounts and I/Y rod knuckles bolt to the ISO 21287 face. This unit has no magnet; if you need CMSE or DMSE switches, order the -S version to add the optional magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it pushes 563 N and pulls 483.8 N; theoretical maximum is 82 kgf at 1.0 MPa. The ordered stroke is 110 mm and the -10 stop screw trims the extend stroke by up to 10 mm, giving a 100-110 mm usable range. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed 30-500 mm/s.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, hard-chrome plated S45C rod and fixed TPU bumpers at both ends, saving about 50% of the mounting length of an ISO 15552 profile cylinder. This model has no magnet, so no switch can be read; order the -S code to get the optional magnet and then CMSE or DMSE switches mount along the body slots. FA flange and LB foot mounts plus I/Y rod knuckles fit the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.