Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S
The ACEJ32X110-10S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Air drives the rod out and pulls it back, and an external stop screw trims the 110 mm stroke down by up to 10 mm, giving a usable range of 100-110 mm without changing the cylinder. At 0.5 MPa this 32 mm bore delivers 402.1 N on the push stroke and 345.6 N on the pull stroke, rising to 563 N and 483.8 N at 0.7 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries where a full-length body will not fit. The hard-anodized aluminium body carries an S45C hard-chrome rod, with a fixed TPU bumper at each end absorbing end-of-stroke energy. Because the -S magnet is fitted, CMSE or DMSE reed and solid-state switches can be clamped straight into the body slots for end-of-stroke sensing. For lift planning, 402.1 N at 0.5 MPa works out to about 41 kgf, so with a 2:1 margin it lifts about 20 kg vertically.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S Is Used
Jig clamping on machining fixtures
The 100-110 mm adjustable window lets a fixture builder dial in clamp travel on the machine, while 402.1 N at 0.5 MPa holds aluminium or mild-steel workpieces firmly during drilling and milling.
Product push-off at conveyor ends
A 110 mm stroke sweeps cartons or trays off a conveyor lane into a chute, and the compact body mounts between guard rails where an ISO 15552 profile cylinder would be too long.
Box eject from packaging chutes
In carton-forming stations the stop screw trims the extend stroke to match chute depth, and the fitted -S magnet feeds CMSE switch signals to the PLC for box-present confirmation.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S the Right Cylinder?
Size by force: if 402.1 N push at 0.5 MPa is more than you need, the ACEJ25X110-10S gives 245.4 N at the same pressure; if you need more headroom, the ACEJ40X110-10S reaches 628.3 N. Note that 110 mm is within the 200 mm maximum standard stroke for the 32 mm bore, so no made-to-order stroke is required. The stop screw is a mechanical end stop only - on air loss the piston still drifts, so do not rely on it to hold a load mid-stroke. Mount with FA flange or LB foot brackets on the ISO 21287 face, add I or Y rod knuckles if the tooling needs a swivel, and keep the -S magnet in mind when specifying CMSE / DMSE switch positions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S FAQ
At 0.5 MPa it pushes with 402.1 N and pulls with 345.6 N; at 0.7 MPa those figures rise to 563 N push and 483.8 N pull, with a theoretical maximum of 82 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 110 mm extend stroke by up to 10 mm, so the working range is 100-110 mm. It shortens the stroke only - it never extends past the ordered 110 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at both ends.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and a female M8x1.25 rod thread. Air ports are 1/8" PT. Magnet slots run around the body, and because this model carries the optional -S magnet, CMSE or DMSE reed and solid-state switches mount directly for end-of-stroke detection. FA flange and LB foot brackets plus I and Y rod knuckles bolt straight to the mounting face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.