Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB
The ACEJ32X110-10SB is a double acting AirTAC compact cylinder built to ISO 21287, with a 32 mm bore and a 110 mm stroke that an external stop screw can trim by up to 10 mm on site, giving a usable extend range of 100-110 mm. Air drives the rod in both directions, and a fixed TPU bumper at each end absorbs end-of-stroke shock. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N.
The hard-anodized aluminium body with an S45C hard-chrome-plated 12 mm rod saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding. Because the -S magnet is fitted, CMSE or DMSE switches can be clamped anywhere along the body for end-of-travel signals. Plan on about 240 N (roughly 24 kg) of real working force at 0.5 MPa, which lifts about 12 kg vertically with a 2:1 margin; the male (B) rod thread and PT ports keep plumbing straightforward.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB Is Used
Fixture clamping on CNC machining centres
The 402.1 N push at 0.5 MPa clamps aluminium or small steel workpieces, and the 10 mm window lets a setter dial the grip point between 100 and 110 mm without shimming.
Product push-off at conveyor transfers
With about 24 kg of usable working force, the cylinder kicks cartons or trays off a transfer plate; the fitted magnet plus a CMSE switch confirms the extend position each cycle.
Box forming on carton sealers
The short ISO 21287 body fits inside tight sealing heads where a full-length profile cylinder will not, and the male rod thread suits knuckle or bracket links on the flap folder.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB the Right Cylinder?
Size against neighbours: the 25 mm bore delivers 245.4 N push at 0.5 MPa, while the 40 mm bore reaches 628.3 N, so this 32 mm model sits mid-range for clamping and positioning duty. Remember the stop screw only shortens the extend stroke - it is not a mid-stroke lock, so the rod still drifts if air is lost. FA flange or LB foot mounts bolt to the ISO 21287 face, and the fitted -S magnet lets you add CMSE / DMSE switches without reordering.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push rises to 563 N and pull to 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The ordered stroke is 110 mm and the -10 stop screw trims the extend stroke by up to 10 mm, so the working range is 100-110 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends to soften arrival. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount in the body slots. FA flange and LB foot brackets plus I/Y rod knuckles bolt straight to the standard face; the rod end is male thread and the port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.