Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S
The ACEJ32X110-20S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 110 mm stroke by up to 20 mm on site, giving a usable range of 90-110 mm without changing the cylinder. At 0.5 MPa the 32 mm bore delivers 402.1 N push and 345.6 N pull, rising to 563 N push at 0.7 MPa. In practice, plan on roughly 241 N of real work at 0.5 MPa, which is enough to lift about 20 kg vertically with a 2:1 margin.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries where a full-length cylinder will not fit. The hard-anodized aluminium body carries a 12 mm S45C hard-chrome-plated rod with a female M8x1.25 thread, 1/8" PT ports, and a fixed TPU bumper at each end. This -S model carries the optional magnet, so CMSE / DMSE reed or solid-state switches can be mounted for end-of-stroke sensing.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S Is Used
Fixture clamping on CNC pallets
The 90-110 mm adjustable extend lets one cylinder serve several pallet sizes, with 402.1 N push at 0.5 MPa clamping aluminium fixtures securely.
Reject pusher on packaging lines
A short 110 mm body fits beside narrow conveyor frames, kicking off-runs or damaged cartons at up to 500 mm/s with the magnet confirming extend.
Sample lift in lab automation
Lifts about 20 kg vertically with a 2:1 margin, raising trays or test carousels inside compact enclosures where an ISO 15552 profile cylinder is too long.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S the Right Cylinder?
Check the load both ways before ordering. A 25 mm ACEJ gives 245.4 N push at 0.5 MPa - fine below about 24 kg of work - while a 40 mm bore reaches 628.3 N if your fixture grows. The 32 mm sits between them at 402.1 N, and the -20 window suits stations that need a repeatable 90-110 mm extend. Remember the stop screw is a mechanical end stop only: on air loss the piston still drifts, so do not rely on it to hold a load mid-stroke. FA flange or LB foot mountings bolt to the ISO 21287 face, and the fitted magnet works with CMSE / DMSE switches once ordered in the -S code.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S FAQ
At 0.5 MPa this 32 mm bore pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it reaches 563 N push and 483.8 N pull, with a theoretical maximum of 82 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 110 mm extend stroke to any length from 90 to 110 mm. It is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost. Operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, 12 mm hard-chrome S45C rod, female M8x1.25 rod thread, 1/8" PT ports and fixed TPU bumpers at both ends. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots to signal extend and retract positions. FA flange and LB foot mountings bolt straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.