Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30
The ACEJ32X110-30 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 110 mm stroke by up to 30 mm on site, giving a usable range of 80-110 mm without changing the cylinder. At 0.5 MPa the 32 mm bore delivers 402.1 N push and 345.6 N pull, rising to 563 N push at 0.7 MPa. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit.
In practice, plan on roughly 241 N of real work at 0.5 MPa (about 60% of the rated push), which corresponds to lifting about 20 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries a S45C hard-chrome plated rod with a female M8x1.25 thread, a fixed TPU bumper at each end absorbs end-of-stroke shock, and the 1/8" PT ports take air filtered to 40 um at 0.15-1.0 MPa (22-145 psi). Note that this unit has no magnet fitted; the optional -S code adds one for CMSE / DMSE switches.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30 Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30 Is Used
Multi-product jig clamping
A 30 mm adjustment window lets one fixture clamp parts from 80 to 110 mm tall, with 402.1 N push at 0.5 MPa holding workpieces securely during machining or welding.
Conveyor stop and divert stations
The short ISO 21287 body mounts between conveyor frames where a full-length profile cylinder will not fit, and the stop screw trims the throw to match lane spacing.
Carton ejection on packaging lines
With about 20 kg vertical-lift equivalent and 30-500 mm/s speed, the cylinder pushes cartons off a belt quickly, and the fixed TPU bumpers quiet the end of each stroke.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30 the Right Cylinder?
Size this bore by load: the next size down, bore 25, gives 245.4 N push at 0.5 MPa, while the next size up, bore 40, reaches 628.3 N. If your fixture needs more than about 241 N of continuous working force at 0.5 MPa, step up to the 40 mm bore. The 30 mm window suits stations where one cylinder serves several product lengths between 80 and 110 mm. Remember the stop screw is a mechanical end stop only: on air loss the rod drifts, so it is not a mid-stroke lock. FA flange or LB foot mounts bolt to the ISO 21287 face, and order the -S variant if you need CMSE / DMSE position switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30 FAQ
Push is 402.1 N and pull is 345.6 N at 0.5 MPa; at 0.7 MPa push rises to 563 N and pull to 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. The ordered stroke is 110 mm and the -30 code gives a 30 mm adjustment window, so the extend stroke can be trimmed anywhere from 80 to 110 mm via the external stop screw. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, an S45C hard-chrome rod with female M8x1.25 thread, and a fixed TPU bumper at both ends. The body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Sensing requires the optional -S magnet code: this model has no magnet fitted, so CMSE or DMSE switches can only be used if you order the -S variant. FA flange and LB foot mounts bolt straight to the ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.