Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S
The ACEJ32X110-30S is a double acting AirTAC compact cylinder built to ISO 21287, with a 32 mm bore and a 110 mm stroke that an external stop screw can trim anywhere in a 30 mm window, giving a usable extend range of 80-110 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, rising to 563 N at 0.7 MPa. Its hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body cannot go.
The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped onto the body slot for end-of-stroke signalling. A fixed TPU bumper at each end absorbs end-of-stroke energy, the S45C hard-chrome rod carries a female M8x1.25 thread, and the 1/8" port keeps plumbing simple. As a rule of thumb, plan on roughly 240 N of real work at 0.5 MPa, which lifts about 24 kg vertically with a 2:1 margin.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S Is Used
Jig clamping on CNC fixtures
The 80-110 mm adjustable extend range lets a machinist dial in exact clamp travel on aluminium or steel workpieces, with 402.1 N of push at 0.5 MPa holding parts firmly against locators.
Packaging line pusher gates
A short ISO 21287 body fits between conveyor frames where a full-length profile cylinder will not, trimming the stroke down to 80 mm to divert cartons without overtravel.
Lab dosing and press stations
The fitted -S magnet with CMSE / DMSE switches confirms each 110 mm extend cycle on small-batch filling or light pressing rigs, at speeds of 30-500 mm/s.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S the Right Cylinder?
Size against neighbours: the 25 mm bore gives 245.4 N push at 0.5 MPa, while the 40 mm bore reaches 628.3 N, so pick the 32 mm when your load sits between those figures. The 110 mm stroke is well inside the 200 mm maximum standard stroke for this bore, so no made-to-order build is needed. Remember the stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock - on air loss the piston still drifts, so use a valve or external stop to hold position. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt straight to the ISO 21287 face, and the fitted -S magnet lets CMSE / DMSE switches report position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it pushes 563 N and pulls 483.8 N; the theoretical maximum is 82 kgf at 1.0 MPa. The -30 code is a 30 mm adjustment window: an external stop screw shortens the 110 mm extend stroke by up to 30 mm, so the usable range is 80-110 mm. It cannot lengthen the stroke past the ordered 110 mm, and the stop is a mechanical end stop, not a load-holding brake.
The hard-anodized aluminium ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends and a 1/8" port. Because this model carries the -S magnet, CMSE or DMSE reed and solid-state switches can be mounted in the body slots. FA flange, LB foot and FTC brackets plus I/Y rod knuckles attach to the standard ISO 21287 mounting face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.