Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB
A double acting ISO 21287 compact cylinder, the ACEJ32X110-30SB pairs a 32 mm bore with a 110 mm stroke that an external stop screw trims anywhere in a 30 mm window, giving a usable extend range of 80-110 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N, with a theoretical peak of 82 kgf at 1.0 MPa. The B code gives a male rod thread on the 12 mm S45C hard-chrome rod.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body cannot. Because only about 60% of the push rating does real work in practice, plan on roughly 241 N of usable force - about 24 kg of vertical lift with a 2:1 margin. The fitted -S magnet accepts CMSE / DMSE switches, and a fixed TPU bumper absorbs end-of-stroke energy at both ends.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB Is Used
Multi-product weld fixture clamping
The 80-110 mm adjustable extend range lets one cylinder clamp both small and large bracket variants on the same jig, with 402.1 N of push holding parts square at 0.5 MPa.
Carton width changeover on a packing line
Trim the stop screw between SKUs instead of swapping cylinders; the short ISO 21287 body fits inside tight guarding, and the fitted magnet feeds CMSE switches for box-present checks.
Case divert on a conveyor transfer
Male rod thread and 563 N push at 0.7 MPa give a firm kick to divert cases at the transfer, while the 110 mm stroke covers the lane width and the TPU bumper quiets the return.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB the Right Cylinder?
At 402.1 N push at 0.5 MPa this 32 mm bore suits clamping and positioning loads in the 240 N class once you keep a working margin; step down to a 25 mm bore (245.4 N) for lighter fixtures or up to a 40 mm bore (628.3 N) when the load grows. The 30 mm window lets one cylinder serve several product widths between 80 and 110 mm of stroke. Note the stop screw is a mechanical end stop only - on air loss the piston drifts, so add a valve or external stop if you must hold position. FA flange or LB foot mounts bolt to the ISO 21287 face, and the male rod thread (B) takes standard rod accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push is 563 N and pull 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 110 mm extend stroke by up to 30 mm, so the working range is 80-110 mm. It cannot lengthen the stroke past 110 mm, and the stop is not a mid-stroke lock - the piston still drifts if air is lost.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, a 12 mm hard-chrome S45C rod, a fixed TPU bumper at each end, 1/8" ports and 30-500 mm/s speed. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots for end-of-stroke detection. FA flange and LB foot mounts bolt straight to the ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.