Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40
A double acting ISO 21287 compact cylinder, the ACEJ32X110-40 pairs a 32 mm bore with a 110 mm stroke and a 40 mm adjustment window: an external stop screw trims the extend stroke anywhere in the 70-110 mm range without changing the order. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into jigs and gantries where a full-length body will not fit.
For sizing, plan on roughly 240 N of usable push at 0.5 MPa, which is about 24 kg of vertical lift with a margin - enough for small clamping plates or light fixture parts. The hard-anodized aluminium body carries magnet slots, and ordering the optional -S code adds the magnet that lets CMSE / DMSE switches report position; without -S there is no magnet. The fixed TPU bumper at each end absorbs end-of-stroke impact.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40 Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40 Is Used
Fixture clamping on CNC pallets
The 70-110 mm adjustable range lets one cylinder serve different pallet heights, and about 240 N of usable push at 0.5 MPa holds light aluminum workpieces during drilling.
Packaging line part stoppers
With the body about 50% shorter than an ISO 15552 profile cylinder, the stop fits under low guard rails, and the stop screw dials the pop-up height per product size.
Lab sample press station
Pull force of 345.6 N at 0.5 MPa retracts cleanly for loading, while the 110 mm stroke clears deep sample trays in compact benchtop enclosures.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40 the Right Cylinder?
At 402.1 N push at 0.5 MPa this bore sits between the 25 mm (245.4 N) and 40 mm (628.3 N) options: step down for lighter clamps, up if your line pressure sags below 0.5 MPa. The 110 mm stroke is well inside the 200 mm standard limit for bore 32, so no made-to-order build is needed. Remember the stop screw only shortens the extend stroke - it is not a mid-stroke lock, so on air loss the rod still drifts. FA flange, LB foot, FTC brackets and I/Y rod knuckles bolt to the ISO 21287 face, and the female M8x1.25 rod thread takes standard accessory hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40 FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push rises to 563 N and pull to 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 110 mm extend stroke on site, giving a usable range of 70-110 mm. It shortens only - it never extends past the ordered stroke and does not lock the load.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends and speed of 30-500 mm/s. Position sensing requires the optional -S magnet code; this model (no S) has no magnet, so no CMSE or DMSE switch can be mounted. FA flange, LB foot, FTC brackets and I/Y knuckles attach to the standard ISO 21287 face, and the 1/8" port takes PT fittings.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X110-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.